英文:The ship maintained a bearing of 270 degrees. 中文:船保持着270度的方向。 英文:His calm bearing helped reassure the panicked crowd. 中文:他镇定的举止有助于安抚惊慌失措的人群。 英文同义表达: “bearing”作为“轴承”的同义表达可以是“bushing”,通常用于描述支撑旋转体...
Top categories
clockwise as an angle from true north on a compass. This can also be called aheading. In this system, north is0°, east is90°, south is180°, and west is270°. When you are viewing a Mapbox map, the bearing rotates the map around its center the specified number of degrees. ...
The comparison confirmed that ACI 349 method (i.e. 45° degrees model) is unconservative even for larger fasteners, while CCD approach is conservative causing measured failure loads approximately 10% higher than the previsions. As an explanation, it was inferred that the CCD approach is based ...
the bearing outer ring; the annular track on the bearing inner ring and the annular track on the bearing outer ring have the contact points with the rolling body; and the contact points have the included angles (ranging from 150 degrees to 270 degrees) with the axis of the rolling body. ...
(I set the date/time to 15th of each month and then advanced the time a minute at a time until the sun first disappeared below the horizon, which put its altitude at < ±0.5 degrees.) I used https://www.heavens-above.com/main.aspx Set for my location. I selected: "Astronomy";...
Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 1...
Note: The inclination cannot exceed 3 degrees. (3) Single row angular contact ball bearings (technical grade: P4, P5, P6, P0) Angular contact bearings are suitable for high-speed and high-precision rotation. They do not affect their accuracy in high temperature, magnetic...
Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45...
A compressor includes a rotary drive shaft having a first end and a second end, both the ends being rotatably supported by opposing walls of a crank chamber defined in a casing and a swash plate tilta