Programming the ASWCSTALK * If this is the first time the ASWCSTALK is being installed: 1. Turn the ignition on; the led will start flashing rapidly which means the interface is looking for the ASWCSTALK and the radio. Go to step 3. OR * If the ASWCSTALK was installed before: 1. Tu...
3 Overview Introduction to the ASWC Interface and Wiring Harness On the top of the ASWC interface there are three points of interest: 1) The programming LED – flashes rapidly when in auto detect mode, flashes slowly in manual programming mode. 2) The reset button – Hold down button for ...
The Axxess Updater by Metra Electronics allows installers of the Axxess ASWC-1 and other Axxess Interface products to update firmware and configure functionality in the field in conjunction with the Axxess AX-HUB accessory. * Find installation instructions for the Axxess ASWC-1 * Configure button re...