My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both wit...
I've just checked my Intel AX210 card, which I have installed in an old Intel Hack running Sonoma, and Messages works just fine it syncs with iCloud as expected sends and receives messages. I don't have a Webcam connected to the system so don't know if FaceTime would work, but as...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both ...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both with the sa...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both with the same...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both w...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both ...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both with the sa...
My AX210 and BE200 will only connect to a 5GHz Network if the channel width is no larger than 20mhz.As soon as I set it to 40 or 80Mhz, it will be "locked" to Wi-Fi N. 2.4GHz works fine. For a router, I'm using a Mikrotik hAP ax3 and an ax2. Both with the...