Hello NXP team, what I am doing is adapting the AW-358SM module on iMX93, using kernel version 6.1.36. At first I ported the driver from the corresponding version of iMX8MP. (iMX8MP is able to use this module normally) can normally generate wifi nodes, but using wpa_supplicant to ...
Hi, I want to use AW-CM358SM on-board Wi-Fi on my custom board. The AW-CM358SM datasheet is below. I measured the VBAT and VDDIO, relatively 3.3V and
Trying to get an AW-CM 358 m.2 radio module to work with an imx8mp evk board running Linux. What configuration changes are needed to get the radio module to come up? After swapping the module that comes with the evk for the AW-CM358 m.2 module, the radio is...
You can get bases on iMX8MN-EVK or iMX8MM-EVK device tree for that purpose. We use the "AW-CM358SM" on iMX8MN-EVK and iMX8MM-EVK. Please see the device tree by following the link: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/arch/arm64/boot/dts/f...
Solved: Trying to get an AW-CM 358 m.2 radio module to work with an imx8mp evk board running Linux. What configuration changes are needed to get the
Trying to get an AW-CM 358 m.2 radio module to work with an imx8mp evk board running Linux. What configuration changes are needed to get the radio module to come up? After swapping the module that comes with the evk for the AW-CM358 m.2 module, the radio is not c...