[Yes/No]:Match INSUNITS to drawing units? [Yes/No]:** WARNING: you have changed the unit for this drawing database. ** ** All new objects will be drawn according to the new unit, but ** ** existing objects will not change size unless you specifically ** *...
现在,您将看到提示:Scale objects in current drawing to reflect change in units? 键入 Y(表示是),然后按 Enter。 现在,您需要选择图形 CTRL+A 并相应地缩放(SCALE。 示例:如果单位最初设置为厘米,而 DWG 单位也已从毫米更改为厘米,则需要将图形缩放为 1:10 因子。 另请参见: 如何...
I'd want to do another but back to my default units in English/Imperial. I did set the STARTUP command to 1 in order to specify if I'd want to start a new design in either mm or inches, however I set it to Imperial, and turned back on DYNMODE (dynamic input)...
[Yes/No] : Match INSUNITS to drawing units? [Yes/No] : ** WARNING: you have changed the unit for this drawing database. ** ** All new objects will be drawn according to the new unit, but ** ** existing objects will not change size unless you specifically ** ** ...
Do you want to change anything? (No/Yes/File)<N>: 如想再修改上面参数可输入Y,否则用N。 完成了以上的设置之后,我们会看到在Plot对话框中的设备栏可选用该设备,后面的工作就如同用绘图机出图一样,就不废话了。如想修改可单击Modify,再选Reconfig重新配置就可以了。
Your drawing units are inches. Use command -DWGUNITS to check. You can change to feet units and when it asks to scale, click no. Then you can change your Standard Dimension Style to Scale = 12.Dave Dave StollLas Vegas, Nevada 64GB DDR4 2400MHz ECC SoDIMM / 1TB SSDNVIDIA...
Sizes are in Inches and the style is landscape Plot origin is at (0.00,0.00) Plotting area is 1024.00 wide by 768.00 high (MAX size) Plot is NOT rotated Hidden lines will NOT be removed Plot will be scaled to fit available area Do you want to change anything? (No/Yes/File)<N>: ...
I’ve also found that many MTEXTs do not fully translate (the AutoCAD Text window says they are, but they don’t change in the dwg), so I’ve had to explode them to TEXT, then it works. Always remember to save a copy of the originals, since the integrity of the information will ...
If the symbol is there to represent a value in inches, replace the " symbol with -INCH (or some equivalent verbiage). Alternately, adding another double quotation symbol to the same Description field can correct the issue. Click OK to apply the changes and exit the dialog. This chang...
It has been a while since I have had to use metric settings on AutoCad. But if I recall, you need to change metric to a default setting in your setup menu.Live Aloha Frank M.Tradewind Resourceshttp://twrusa.tripod.com Reply To This Thread Posting in the Eng-Tips forums is a membe...