AT+CWDHCP:启用/禁用 DHCP AT+CWDHCPS:查询/设置 ESP32 SoftAP DHCP 分配的 IPv4 地址范围 AT+CWAUTOCONN:上电是否自动连接 AP AT+CWAPPROTO:查询/设置 SoftAP 模式下 802.11 b/g/n 协议标准 AT+CWSTAPROTO:设置 Station 模式下 802.11 b/g/n 协议标准 AT+CIPSTAMAC:查询/设置 ESP32 Station 的 MAC ...
AT+CWDHCP:启用/禁用 DHCP AT+CWDHCPS:查询/设置 ESP32 SoftAP DHCP 分配的 IPv4 地址范围 AT+CWAUTOCONN:上电是否自动连接 AP AT+CWAPPROTO:查询/设置 SoftAP 模式下 802.11 b/g/n 协议标准 AT+CWSTAPROTO:设置 Station 模式下 802.11 b/g/n 协议标准 AT+CIPSTAMAC:查询/设置 ESP32 Station 的 MAC ...
AT+CWDHCP_DEF设置DHCP,保存到Flash AT+CWDHCPS_CUR设置ESP8266 SoftAP DHCP分配的IP范围，不保存到...
1.设置模块为AP模式(接收)或STA模式(发送) AT+CWMODE=<mode>[,<auto_connect>] AP命令:AT+CWMODE=2 STA命令:AT+CWMODE=1 2.启用DHCP动态主机配置协议(STA端) 如果不启用DHCP,你需要手动配置网关、子网掩码等,很麻烦 AT+CWDHCP=1,1 3.连接AP AP端既可以是wifi模块,也可以是路由器,连接指令都是一样...
AT+CWDHCP_DEF=<mode>,<en> mode:0/1/2 Station /SoftAP /SoftAP+Station en :0/1 关闭/开启 1. 2. 3. 4. 4、扫描当前可用AP AT+CWJAP 1. 5、WIFI连接,保存到flash AT+CWJAP_DEF="SSID","password" 1. 6、上电自动连AP AT+CWAUTOCONN=<enable> ...
CW模式：2 OK 在CWSAP？+CWSAP:"ESP_123456","mypassword",1,4,1,0 OK AT+CWDHCPS_DEF=1,3,...
AT+CWDHCP_DEFEnable/disable DHCP saved to flash - SoftAP DHCP server enabling is not immplemented. AT+CWAUTOCONNConnect to an AP automatically when powered on. AT+CIPSTAMAC_CURSets or prints the MAC Address of the ESP8266 Station. Only query is implemented. ...
AT+CWDHCP: Enable/disable DHCP. AT+CWDHCPS: Query/Set the IPv4 addresses allocated by an ESP32-C6 SoftAP DHCP server. AT+CWAUTOCONN: Connect to an AP automatically when powered on. AT+CWAPPROTO: Query/Set the 802.11 b/g/n protocol standard of SoftAP mode. ...
at_wifiCmd.o get_dhcp_status at_wifiCmd.o at_queryCmdCwdhcp at_wifiCmd.o set_dhcp at_wifiCmd.o at_setupCmdCwdhcp at_wifiCmd.o at_queryCmdCwdhcpDef at_wifiCmd.o at_setupCmdCwdhcpDef at_wifiCmd.o at_queryCmdCwdhcps at_wifiCmd.o at_setupCmdCwdhcps ...
AT+CWDHCPS_DEF—设置 ESP8266 SoftAP DHCP 分配的 IP 范围,保存到 Flash 32 4.2.19. AT+CWAUTOCONN—上电是否⾃动连接 AP 33 4.2.20. AT+CIPSTAMAC—设置 ESP8266 Station 接⼝的 MAC 地址 34 4.2.21. AT+CIPSTAMAC_CUR—设置 ESP8266 Station 当前 MAC 地址,不保存到 Flash 34 4.2.22. ...