AT+CIPSTATE:查询 TCP/UDP/SSL 连接信息 AT+CIPSTATUS (弃用):查询 TCP/UDP/SSL 连接状态和信息 AT+CIPDOMAIN:域名解析 AT+CIPSTART:建立 TCP 连接、UDP 传输或 SSL 连接 AT+CIPSTARTEX:建立自动分配 ID 的 TCP 连接、UDP 传输或 SSL 连接 [仅适用数据模式] +++: 退出 数据模式 AT+SAVETRANSLINK:设置 ...
设置ESP32 Station的MAC地址 AT+CIPAPMAC 设置ESP32 SoftAP的MAC地址 AT+CIPSTA 设置ESP32 Station的IP地址 AT+CIPAP 设置ESP32 SoftAP的IP地址 AT+CIPSTART 建立TCP连接,UDP传输或者SSL连接 AT+CIPSEND 发送数据 AT+CIPSENDEX 发送数据,达到设置长度,或者遇到字符\0,则发送数据 AT+CIPCLOSE 关闭TCP/UDP/SSL传...
AT+CIPSTART="UDPv6","FF02::FC",1000,1002,0 UDP multicast based on IPv6 network AT+CIPSTART="SSL","iot.espressif.cn",8443 AT+CIPSEND: 透传模式发送数据 AT+CIPSENDEX: Send data in the normal transmission mode in expanded ways. AT+CIPCLOSE: 关闭TCP/UDP/SSL连接 AT+CIFSR: 获取本地IP...
AT+CIPSTART: Establish TCP connection, UDP transmission, or SSL connection. AT+CIPSTARTEX: Establish TCP connection, UDP transmission, or SSL connection with an automatically assigned ID. [Passthrough Mode Only] +++: Exit the passthrough mode. ...
//连接TCP服务器voidESP8266_ConnectTCPServer(constchar*ServerIP,intServerPort){// 定义一个缓冲区用于存储命令字符串charcmd[100];// 发送连接到TCP服务器的命令// 例如:AT+CIPSTART="TCP","192.168.1.100",80sprintf(cmd,"AT+CIPSTART=\"TCP\",\"%s\",%d\r\n",ServerIP,ServerPort);ESP8266_SendC...
3.3.5AT+CIPSTART:建立TCP连接、UDP传输或SSL连接 (58) 3.3.6AT+CIPSTARTEX:建立自动分配ID的TCP连接、UDP传输或SSL连接 (62) 3.3.7[仅适用数据模式]+++:退出数据模式 (62) 3.3.8AT+CIPSEND:在普通传输模式或Wi-Fi透传模式下发送数据 (62) 3.3.9AT+CIPSENDL:在普通传输模式下并行发送长数据 (63) 3....
3.3.6AT+CIPSTART:建立TCP连接、UDP传输或SSL连接 (72) 3.3.7AT+CIPSTARTEX:建立自动分配ID的TCP连接、UDP传输或SSL连接 (75) 3.3.8[仅适用数据模式]+++:退出数据模式 (75) 3.3.9AT+CIPSEND:在普通传输模式或Wi-Fi透传模式下发送数据 (76) 3.3.10AT+CIPSENDL:在普通传输模式下并行发送长数据 (77) ...
AT+CIPSTART=0,"UDP","192.168.4.1",8888,1000,00,CONNECT OK +STA_CONNECTED:"f8:87:f1:0f:35:3b"+DIST_STA_IP:"f8:87:f1:0f:35:3b","192.168.4.2"+DIST_STA_IP:"f8:87:f1:0f:35:3b","192.168.4.2"+IPD,0,63:{"port":63665,"password":"xh12345678","ssid":"iot@xuhongv"} ...
AT+CIPStartex：建立TCP连接、UDP传输或SSL连接 AT+CIPSSLCCONF：config SSL客户端 AT+CiPreConnectionTV...
AT+CIPSTART: Establish TCP connection, UDP transmission, or SSL connection. AT+CIPSTARTEX: Establish TCP connection, UDP transmission, or SSL connection with an automatically assigned ID. [Passthrough Mode Only] +++: Exit the passthrough mode. ...