[LCD Monitor] Touch screen function introduction You can use either single finger touch, or multi-finger touch up to maximum simultaneous 10 touch points. Support OS:Windows 7/8/8.1/10/11 (Please refer to the model announcement) *(MAC is not supported, the reason is the limitation of MAC...
0.2 ms ultrafast display, NanoEdge OLED touchscreen, 100% DCI-P3 color gamut, up to 550 nits peak brightness and support stylus Windows 11 Pro Up to 13th Gen Intel® Core™ i9-13900H processor Up to NVIDIA® GeForce RTX™ 4070 supports NVIDIA Studio MUX Switch with ASUS 17.9...
to last more than 3 hours without direct charge. It's been 2 years and today it mainly sits on it's cooling station with the charger plugged in. If you have another monitor you can have a dual-monitor set-up by treating your laptop screen as t...
This problem could also be caused by an old or incorrect touchpad driver.You can update your printer driver manually or, if you’re not confident playing around with drivers, you can do it automatically withDriver Easy. Driver Easy will automatically recognize your system and find the correct d...
Monitor b. External SCSI devices (starting with the last device on the chain) c. System power 6. After applying power, the system power LED on the system front panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. If ...
Monitor b. External storage devices (starting with the last device on the chain) c. System power 6. After applying power, the system power LED on the system front panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. ...
Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support APM Configuration Hardware Monitor [Auto] [No] [No] [Enabled] Configure CPU. 2.5.1 Suspend Mode [Auto] Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. ...
Monitor b. External SCSI devices (starting with the last device on the chain) c. System power 6. After applying power, the system power LED on the system front panel case lights up. For systems with ATX power supplies, the system LED lights up when you press the ATX power button. If ...
External MonitorIn order to have a fully functional external/internal display behavior, you need to install a mainline kernel greater or equal to 3.8.0 like described above in Upgrading Linux kernel manually. HDMIWorks mostly fine, but see note above. ...
Before the kernel update was added to 12.04 LTS, the following workaround was needed: The kernel USB 3.0 (and sometimes 2.0) modules needs to be unloaded before suspending, and in kernels prior to 3.1 X also needs to disable/enable DPMS to get the screen back on resume. Save the follow...