ASTM D6450-99 用连续闭杯闪(CCCFP)试验仪测定闪点的标准试验方法 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester 适用范围 1.1 本闪点测试方法是一种动态方法,取决于一定的温度升高速率。它是众多可用的闪点测试方法之一,并且每种闪点测试方法(包括本方法)都是一种经验方法。注...
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester 被代替 标准号 ASTM D93-02a 2002年 发布单位 美国材料与试验协会 替代标准 ASTM D93-06 当前最新 ASTM D93-20 适用范围 1.1 本试验方法适用于用手动宾斯基-马丁闭杯仪或自动宾斯基-马丁闭杯仪测定40至360℃温度范围内石油产品的闪点。
ASTM D92Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester 5.1闪点是在受控的实验室条件下测试试样与空气形成可燃混合物的倾向的一种度量。这只是评估材料整体可燃性危害时应考虑的众多特性之一。 5.2闪点在航运和安全法规中用于定义可燃和可燃材料。有关这些分类的定义,请参阅所涉及的特...
2. 参考文献 2.1 ASTM Standards: 2 D 93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester D 140 Practice for Sampling Bituminous Materials D 1310 Test Method for Flash Point and Fire Points of Liquids by Tag Open-Cup Apparatus D 4057 Practice for Manual Sampling of Petroleum ...
1.1 This test method describes the determination of the flash point and fire point of petroleum products by a manual Cleveland open cup apparatus or an automated Cleveland open cup apparatus. Note 1—The precisions for fire point were not determined in the current interlaboratory program. Fire poi...
Referenced Documents2.1 ASTM Standards:D 56 Test Methods for Flash Point by Tag Closed CupTesterD 3941 Test Method for Flash Point by the EquilibriumMethod with a Closed-Cup ApparatusD 4057 Practice for Manual Sampling for Petroleum andPetroleum ProductsD 4177 Practice for Automatic Sampling of ...
ASTM D7094Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester 5.1闪点温度是测试样品在受控实验室条件下与空气形成可燃混合物的倾向的一种度量。这只是评估材料整体可燃性危害时必须考虑的众多特性之一。 5.2闪点在航运和安全法规中用于定义易燃和可燃材料并进行分类。这一定义...
flash point methods are generally used for testing a sample at a specifictemperature where the specimen being tested and the air–vapor mixture above it are close to thermalequilibrium. Test Method D3941 covers other flash point equipment operated at a specific temperature.Flash point values are a...
Designation: D3941 − 20Standard Test Method forFlash Point by the Equilibrium Method With a Closed-CupApparatus 1This standard is issued under the f i xed designation D3941; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, th...
Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methodsdoi:ASTM E502-84(1994)1.1本试验方法涵盖液体和固体化合物闪点的测定,闪点在10到370之间\no\nC(16至700\no\nF) .应使用试验方法D56,D93,D3278,D3828和D3941中的程序...