Referenced Documents2.1 ASTM Standards: 2C78 Test Method for Flexural Strength of Concrete (UsingSimple Beam with Third-Point Loading)C1161 Test Method for Flexural Strength of AdvancedCeramics at Ambient TemperatureE4 Practices for Force Verif i cation of Testing MachinesE177 Practice for Use of ...
Electrical Insulation Performance Comparisons between Kapton and Teflon Coil Insulation Systems for Pulse Power Applications Testing was performed per specification of ASTM D897 - 01, Standard Test Method for Tensile Properties of Adhesive Bonds. Three rounds of performance ......
7、9/C39M Test Method for Compressive Strength of Cylindrical Concrete SpecimensC7878/C78M Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)C174/C174M Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete CoresC496/C496M Test Meth...
格式:PDF 页数:4 大小:37.21KB《ASTM B394-2003 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes《铌和铌合金无缝及焊接管标准规范》.pdf》由会员分享,可在线阅读,更多相关《ASTM B394-2003 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes《铌和铌...
ed in Test Method C78 but incorporating a closed-loop, servo-controlled testing system and roller supports that are free to rotate on their axes. Load and net de?ection are monitored and recorded to an end-point de?ection of at least 1?150 of the span. Data are recorded and plotted by...
11.3 The tubing shall be free of injurious defects and shall have a workmanlike nish. Surface imperfections such as handling marks, straightening marks, light die marks, or shallow pits are not considered injurious. 11.4 The tubing shall be free of scale. In the case of thermally treated ...
27、absorbent or treated to preventthe absorption of fuel.5.2.1.3 If a flexible tank liner is used, it must be supportedso that it is not required to withstand fluid loads.5.2.1.4 Interior surfaces adjacent to the liner must besmooth and free from projections that could cause wear, unlesspr...
An iron-tin alloy layeris developed during the melting operation, thus reducing theamount of free tin available. Due to the limitations of thereflow section of the plating lines, certain thicknesses may notbe 19、 available with a melted finish.3.4 oilan extremely thin oil film furnished on ...