Product name:Instant AP;Warranty:1 Year;Support:Wifi Sharing.wifi Repeater;Interface:4 LAN /1 WAN;WIFI:802.11 A/b/g/n/ac;Dimensions:25cmx22cmx10cm;Condition:New Original F/S;Weight:1-2kg;Antenna:No;Network Transmission:3G/4G/5G Depend;max. lan data rate:
The no form of this command removes application of the ACL from the interface VLAN (or range of interface VLANs) identified by the current interface VLAN context. Parameter Description ip|ipv6 Specifies the ACL type: ip for IPv4, ipv6 for IPv6. <ACL-NAME> Specifies the ACL name. ...
Specify a single interface or LAG, or a range as a comma-separated list, or both. For example: 1/1/1, 1/1/3-1/1/6,lag2, lag1-lag4. UsageWhen a port filter configuration is applied on the same ingress physical port/LAG, the configuration is updated with the new sets of egress...
Range: 1 to 4094. ExamplesAssigning native VLAN ID 20 to trunk interface 1/1/2: switch(config)# interface 1/1/2 switch(config-if)# vlan trunk native 20Removing native VLAN 20 from trunk interface 1/1/2 and returning to the default VLAN 1 as the native VLAN. switch(config)# ...
switch(config)#interface lag 2 switch(config-lag-if)#no vlan protocol ipv6 10 Command History Release Modification 10.07 or earlier -- Command Information Platforms Command context Authority 6200 config-if config-lag-if Administrators or local user group members with execution rights for this command...
Description Shows the OSPF link state database summary for different OSPF LSAs (Link State Advertisement). Use the parameters to get information for a particular LSA. Examples Showing OSPF link state database (LSDB) general information: switch#show ip ospf lsdbOSPF Router with ID (50.50.50.50) ...
The no form of this command removes application of the ACL from the interface VLAN (or range of interface VLANs) identified by the current interface VLAN context. Parameter Description ip|ipv6 Specifies the ACL type: ip for IPv4, ipv6 for IPv6. <ACL-NAME> Specifies the ACL name. ...
Range: 1 to 4094. ExamplesAssigning native VLAN ID 20 to trunk interface 1/1/2: switch(config)# interface 1/1/2 switch(config-if)# vlan trunk native 20Removing native VLAN 20 from trunk interface 1/1/2 and returning to the default VLAN 1 as the native VLAN. switch(config)# ...
The no form of this command removes the configured BFD minimum transmitted interval on an interface. If the interval is not set, the default interval is used. Parameter Description <INTERVAL> Specifies the minimum transmit interval in milliseconds. Range: Default: 3000....