Aruba 2930 M/F Management and Configuration Guide for AOS-S Switch 16.10 © Copyright 2020 Hewlett Packard Enterprise Development LP Notices The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise pro...
For example to get Vlan Ports of 2 switchs #Connect to first switch$sw1=Connect-ArubaSW192.0.2.1-SkipCertificateCheck-DefaultConnection:$false#DefaultConnection set to false is not mandatory but only don't set the connection info on global variable#Connect to second switch$sw2=Connect-ArubaSW19...
tasks: - name: Create VLAN 300 arubanetworks.aos_switch.arubaoss_vlan: vlan_id: 300 name: "vlan300" config: "create" command: config_vlan api_version: v6.0 What the switch model/firmware and configuration ? Adding api_version: v6.0 results in exactly the same error message. Even copyin...
The computers are also connected to the 2930F Swtichen and work well. We just have the problem with the servers. The servers are still running onan old HP Switch and the old HP Switcht is connected to the VSF. The problem only occurs when I have a (all) server with 2 network cards...
It shows NONE of the devices on the switch itself! 0 Kudos Emil_G HPE Pro 04-06-2020 02:05 AM Re: Procurve 2530 sh mac-address return nothing Hello, Please save to text files the outputs of the commands show mac-address show tech all Upload the outputs to ftp://es...
289 12 Aruba 2930F / 2930M Multicast and Routing Guide for ArubaOS-Switch 16.08 Chapter 1 About this guide This guide provides information on how to configure IGMP, PIM and routing protocols. Applicable products This guide applies to these products: Aruba 29...
In the CLI it works with the following two commands: vlan 1 untagged 6 no vlan 1 untagged 6 I tried this playbook: --- - hosts: switch1 tasks: - name: Set Port 6 untagged 6 on VLAN 1 arubaoss_vlan: command: config_vlan_port config: create vlan_id: 1 port_id: 6 port_mode:...
Depending on the switch model, fast-leave is enabled or disabled in the default configuration. With fast-leave enabled and an IGMP Group Leave being received on a non-cascaded port, the following events take place: 11 Aruba 2930M/F | Multicasting and Routing ...