安装好Vivado后,可以在在0.2的资料链接处下载包含Arty-A7的板卡支持包,解压后将new/board_file中的全部文件复制,粘贴进Vivado的安装目录下的<version>/data/boards/board_files文件夹后重启Vivado,就可以在新建工程时选择对应的板卡了。 1-1-4 当然,也可以选择相应的芯片建立工程,比如Arty-A7-35T选择的芯片应为XC...
对于Arty-A7板卡上搭载的XC7A35T这一纯FPGA(没有嵌入式硬核)来说,最直白的点灯方式就是用硬件描述语言(这里使用VerilogHDL)设计一个计数器对板上晶振输入的信号进行分频,得到肉眼可分辨频率的信号后输出,驱动LED灯闪烁。 而另一方面,考虑到Arty-A7作为专为Microblaze软核开发设计的板卡,我也想先学习设计这样一个片...
I encountered the same problem days ago and I solved this problem by adding a line into Arty-A7-100-Master.xdc file: set_property CLOCK_DEDICATED_ROUTE TRUE [get_nets system_i/clk_wiz_0/inst/clk_out1] See https://support.xilinx.com/s/article/75692 0 zzzhhh Members 27 Posted ...
SKU: 410-352-25 Current Stock: Quantity: Check Distributor Stock Add to Wish List VideosHide Videos Xilinx Debuts the First Spartan-7 FPGA This video introduces the first member of the Spartan-7 family... ARTY S7 Introduction ARTY S7 Introduction ...
With the wrapper information I added a xdc using using the pin names in the wrapper. I then generated a bitstream. Next I opened the Hardware Manager and configured the Arty A7 with the bitstream. I then probed the pin 1 on JA (the pin I used for this project) with the Analog ...