1. A printed article including an article and a light-storing printed layer on the front side of said article, said light-storing printed layer containing 50-80 wt % of light-storing pigment and a balance binder, said pigment having D50=22-35 μm and D90=58-80 μm, and the thickness ...
A control test section employing a conventional cut-and-fill approach was also constructed in the secondary highway. Fly ash was used to increase the strength and stiffness of the fine-grained subgrade at both sites, which was soft prior to stabilisation. Pavements at both sites were designed ...
Therefore, the purpose of this research is to apply a LCA to estimate the total emissions of CO2, NOx, and SOx as well as the total life cycle costs of three embankments鈥攐ne constructed by the conventional method (cut and fill), one with lightweight geomaterial mixed with expanded ...
A novel accelerated HF-H{sub}2SO{sub}4 etch allowed 100 渭m wide mirrors to be undercut in 12 min with no etch release holes.doi:10.1109/JMEMS.2004.824896Jonathan J. BernsteinMehmet R. DokmeciGregory KirkosAmy Bowman OsenarJohn PeanaskyAjay PareekJournal of Microelectromechanical Systems: A...