针对你遇到的问题“error while launching command: arm-none-eabi-gdb --version”,我们可以按照以下步骤进行排查和解决: 确认arm-none-eabi-gdb是否已正确安装: 首先,我们需要确认arm-none-eabi-gdb是否已经在你的系统上安装。可以在命令行中尝试直接运行以下命令: bash which arm-none-eabi-gdb 如果这个命令...
在STLINK驱动、OPENOCD配置正确的情况下,在STM32CUBEIDE中开启openocd调试或者直接使用命令arm-none-eabi-gdb ./xxx.elf调试会得出如下错误 arm-none-eabi-gdb: /lib/x86_64-linux-gnu/libncurses.so.5: version `NCURSES_5.3.20021019' not found (required by arm-none-eabi-gdb)arm-none-eabi-gdb: /li...
并且已经将其添加到系统路径中。你可以通过在终端中输入arm-none-eabi-gdb --version来检查是否已经正确...
sudo apt install apt-file sudo apt-file update sudo apt-file find libncursesw.so.5 sudo apt install libncursesw5 错误二 启动报错: Could not find platform independent libraries <prefix> Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_pref...
日食(KDS) + Segger当尝试打开调试器时,会显示错误Could not determine GDB version after sending: arm-none-eabi-gdb --version, response:。 代码语言:javascript 复制 sudo apt-get install libncurses5:i386 需要32位版本的libncurses5 .一旦它到位,问题就解决了。 收藏分享票数3 EN...
arm-none-eabi-gdb: error while loading shared libraries: libpython3.6m.so.1.0: cannot open shared object file: No such file or directory 这个问题的本质是缺少python3.6版本的一个依赖文件。 但是这个不能通过apt很好的安装。 网络上的解决办法大家大多数是从官网上编译下载python3.6,之后再将对应的文件移...
arm-none-eabi-gdb --version Finally, please can you confirm the exact version of Windows that you are running?Regards,LPCXpresso Support 0 Kudos Reply 06-15-2016 02:29 PM 733 Views lpcware NXP Employee Content originally posted in LPCWare by jone1316 on Sun Feb 07 10:56:10 ...
如果用sudo apt-get remove gcc-arm-none-eabi安装的交交叉编程工具,是没有含GDB工具的,所以需要卸载后才能安装。 sudo apt-get remove gcc-arm-none-eabi就可以完成卸载,如果还有在/usr/bin/arm-none-eabi-下面的文件有冲突的,先要删除才能安装成功。
Solved: Hello, I am using MCUXpresso and I.MX RT1176 EVK on ubuntu 22.04. I want to debug a hello_world sdk project. Build operation is OK but when i
but I get this error: Error while launching command: arm-none-eabi-gdb --version I am not sure if it is releated this step: *Confirm that the J-Link GDB server is running. A shortcut named J-Link GDB Server via SWD can be found under the SEGGER entry on the Start m...