Toolchain 的版本我们根据 Toolchain 的名字或者通过arm-linux-gnueabihf-gcc -v 命令就可以查到。编译 ...
arm-linux-gcc : v7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] QEMU 介绍 Qemu 是纯软件实现的虚拟化模拟器,几乎可以模拟任何硬件设备,我们最熟悉的就是能够模拟一台能够独立运行操作系统的虚拟机,虚拟机认为自己和硬件打交道,但其实是和 Qemu 模拟出来的硬件...
apt-get install gcc-arm-linux-gnueabihf apt-get install g++-arm-linux-gnueabihf wget https://ftp.denx.de/pub/u-boot/u-boot-2023.07.tar.bz2 tar -jxvf u-boot-2023.07.tar.bz2 cd u-boot-2023.07/ make vexpress_ca9x4_defconfig ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- export ARCH=arm expo...
$arm-ca9-linux-gnueabihf-readelf -A arm_compute_validation Attribute Section: aeabi File Attributes Tag_CPU_name: "7-A" Tag_CPU_arch: v7 Tag_CPU_arch_profile: Application Tag_ARM_ISA_use: Yes Tag_THUMB_ISA_use: Thumb-2 Tag_FP_arch: VFPv3 Tag_Advanced_SIMD_arch: NEONv1 Tag_ABI_PCS...
export CROSS_COMPILE=arm-linux-gnueabihf- make clean make vexpress_ca9x4_defconfig 提示bison: not found sudo apt-get install bison 提示flex: not found sudo apt-get install flex make vexpress_ca9x4_defconfig make -j8 执行仿真u-boot qemu-system-arm -M vexpress-a9 -m 256 -kernel u-boot -no...
set(CMAKE_C_COMPILER arm-linux-gnueabihf-gcc)执行编译 直接编译 mkdir build&cd build cmake.make-j 以静态库编译 mkdir build&cd build cmake-DBUILD_SHARED_LIBS=OFF.make-j 编译输出的内容 Demo执行文件路径:./output/bin/库文件... 网关SDK export_PATH_=\$(pwd)/toolchain/gcc-linaro-arm-linu...
先输入命令:arm-linux-gnueabihf-gdb vmlinux 再gdb下输入:target remote localhost:1234 后就连接了qemu中开启的gdbserver 设置断点比如: b start_kernel (设置断点) c (continue 运行到断点处) 成功截图如下~ image.png 添加文件系统启动 参考虚拟机中文件系统制作,同样制作 ...
* 硬件平台均为QEMU模拟器。 1. 当前裸机项目使用ARM Cortex-A7 32位内核、带有GPU(2D 3D显示加速、图片和音频视频编解码)的博通BCM2836芯片(树莓派2B同款硬件,但不使用树莓派的系统和软件)。 2. 当前Linux项目使用ARM Versatile Express开发板,从源码编译运行U-Boot
下载完后,可以看到 configs 目录下有针对这款开发板的配置文件ls configs/vexpress_ca9x4_defconfig make vexpress_ca9x4_defconfig makeCROSS_COMPILE=arm-linux-gnueabihf- all 1. 报错:没有arm-linux-gnueabihf 解决:sudo apt install gcc-arm-linux-gnueabihf ...
export CROSS_COMPILE=arm-none-linux-gnueabihf- # 增加交叉编译器的路径,修改成你自己解压的路径 export PATH=$PATH:/home/jim/Desktop/tools/arm-gnu-toolchain-11.3/bin 1. 2. 3. 4. 5. 编译U-Boot: make vexpress_ca9x4_defconfig make -j4 ...