switch#show interfaces Ethernet8/1 transceiver dom thresholdsCh: Channel, mA: milliamperes, dBm: decibels (milliwatts), C: Celsius, V: Volts, NA or N/A: not applicable. Ethernet8/1 Last update: 0:00:02 ago High Alarm High Warn Low Warn Low Alarm Parameter Ch Value Threshold Threshold ...
You can check the configured TX power using the show interface transceiver hardware command and the actual operational TX power using the show interface transceiver command. Note: 400GBASE-ZR does not have a recommended level of transmit laser power. In most cases, it is okay to keep the de...
(NTP sync) + * Check for critical process + * Check for transceiver status + * Check for pmon status + * Check for reboot cause + * Reboot is successful + +Reboot Test Case for DPU: + * Save the configurations of all DPU state before reboot + * Power on all the DPUs that were...
status Show Interface status information switchport Show Interface switchport information tpid Show Interface tpid information transceiver Show SFP Transceiver information ``` Expand Down Expand Up @@ -4654,6 +4657,50 @@ This command displays some more fields such as Lanes, Speed, MTU, Type, Asym...
Changing line cards or transceiver modules. Replace, reattach, and reroute cables. Maintenance mode uses BGP to reroute traffic from the switch when performing maintenance tasks, minimizing traffic impact. Set the traffic thresholds and time limits at which the switch or parts of the switch are con...
The four interfaces created by this feature are namedx/1tox/4instead and each interface has two transceiver lanes attached to it. Thus each interface can be configured to two-lane, four-lane or eight-lanes speeds as appropriate. However, the interfaces are restricted from any single-lane speed...
switch#show interfaces Ethernet8/1 transceiver dom thresholdsCh: Channel, mA: milliamperes, dBm: decibels (milliwatts), C: Celsius, V: Volts, NA or N/A: not applicable. Ethernet8/1 Last update: 0:00:02 ago High Alarm High Warn Low Warn Low Alarm Parameter Ch Value Threshold Threshold ...
switch#show interfaces Ethernet8/1 transceiver dom thresholdsCh: Channel, mA: milliamperes, dBm: decibels (milliwatts), C: Celsius, V: Volts, NA or N/A: not applicable. Ethernet8/1 Last update: 0:00:02 ago High Alarm High Warn Low Warn Low Alarm Parameter Ch Value Threshold Threshold ...