Arduino开发板:作为整个项目的控制核心,可以选择Arduino Uno、Nano等常见的型号。 显示屏:一个小型的LCD或OLED显示屏,用于显示游戏画面。例如,可以使用1.8英寸的TFTLCD显示屏。 按钮:用于游戏的操作,至少需要准备4个按钮,分别对应上、下、左、右方向键,以及A、B等操作按钮。 蜂鸣器:用于游戏中的音效提示,增加游戏的...
Each of the 14 digital pins on the Uno can be used as an input or output, using pinMode(),digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each pin can provide or receive 20 mA as recommended operating condition and has an internal pull-up resistor (disconnected by...
The board I recommend starting with is theArduino Uno (1050-1024-ND)or compatibles such as theAdafruit Metro (1528-1214-ND),Sparkfun Redboard (1568-1977-ND), orSeeeduino (102010026-ND). To build the circuits in this guide, you will need: Arduino Unoor compatible, and USB cable Sol...
根据收到的字母信息,代码将调用对应该字母的函数。 //Letter functions void lA () {dot();dash();letterPause();}//letter A in morse code! void lB () {dash();dot();dot();dot();letterPause();}//same for B void lC () {dash();dot();dash();dot();letterPause();} void lD ()...
loadBMP()函数仅对具有RAM比较大的微控制器有用,如Adafruit“M0”和“M4”板,或ESP32。像Arduino Uno这样的小设备就无法做到这一点。在Arduino Mega上使用非常小的图像可能可以。 加载完成后,使用img.draw()函数在屏幕上显示图像: img.draw(tft, x, y); ...
Arduino Uno Nokia 5110 Display 3.3V --- 1-VCC PIN #7 --- 3-SCE PIN #6 --- 4-RST PIN #5 --- 5-D/C PIN #4 --- 6-DNK(MOSI) (SDIN) PIN #3 --- 7-SCLK I also posted the sketch on mygithub. One more thing I always wanted to do but never...
上面的图一就是Arduino UNO,现在最新的版本是Arduino UNO R3,以后的教程大部分所使用的板子就是Arduino UNO R3 下面讲解一下Arduino UNO R3的组成部分电源...UNO 有四个LED指示灯: LED 作用 ON 电源指示灯,Arduino UNO 通电时亮起 TX 串口发送指示灯 Arduino通过USB向计算机传输数据时TX灯会点亮 RX 串口接收...
In this tutorial, we will be learning about UnoArduSim, an Arduino simulator which has Arduino Uno and Mega board and have an option to select a up to of 24 I/O devices.
使用硬件: GA-12减速电机、arduino uno、L298N电机驱动板 使用软件:modbus poll、python 首先要明白电机驱动板的工作原理: 通道A使能可以通过PWM调节输出A的电压,从而调节其转速。 其逻辑输入有: 本次使用的库文件为<L298N.h>、"Modbus.h"、"ModbusSerial.h"。均可以在GitHub上找到。
像Arduino Uno这样的小设备就无法做到这一点。在Arduino Mega上使用非常小的图像可能可以。 加载完成后,使用img.draw()函数在屏幕上显示图像: img.draw(tft, x, y); 这个函数有3个参数: 一个显示对象(例如大多数例子中的“tft”),类似于drawBMP()的工作方式。 屏幕上图像左上角的X和Y坐标,同样类似于draw...