一个完整的电池容量测量设备,使用 Arduino-Nano [Lithium-NiMH-NiCd] 特征: 识别假锂离子/锂聚合物/镍镉/镍氢电池 可调恒流负载(也可由用户修改) 能够测量几乎任何类型电池的容量(低于 5V) 易于焊接、构建和使用,即使对于初学者也是如此(所有组件均为 Dip) LCD 用户界面 规格: 板电源:7V 至 9V(最大值) 电池...
此外,我们使用 Arduino Nano 设置关联的外围设备引脚。 常量int slaveSelectPin = 10; // 片选引脚 int number = 0; int 增加 = A2; // 增加 pin int 减少 = A3; //减少引脚 int current_sense = A0; //电流检测引脚 int voltage_sense = A1; // 电压检测引脚 int state1 = 0; int state2 = ...
void loop() { h = dht.readHumidity(); t = dht.readTemperature(); if (isnan(h) || isnan(t)) { Serial.println("Failed to read from DHT sensor!"); return; } showBitmap(); printText(); display.display(); delay(500); display.clearDisplay(); } void printText() { display....
float Current_Value = analogRead(Read_Current);Voltage_Value = Voltage_Value * (5.0/1023.0) *...
IOREF. This pin on the Arduino/Genuino board provides the voltage reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or enable voltage translators on the outputs to work with the 5V or 3.3V. ...
digitalWrite(LED_BUILTIN, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second } (1)注释 /* Blink 闪烁 Turns an LED on for one second, then off for one second, repeatedly. 点亮LED 1 秒钟,然后熄灭,重复上述操作。
SKU: ABX00083 Description The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox®). This is the first Arduino board to be based fully on an ESP32,and features Wi-Fi®, Bluetooth® LE,...
nano直接连nrf24l01模块无法收发数据;但用nano先接传感器扩展板(sensor shield,像这种),再把nrf24l01接到扩展板上,则工作正常。仔细检查过连线没有问题,且分别替换过nano和nrf模块usb线等,都没有效果。最后发现nano板子上的3.3v针脚电压不对,几乎是零,联系卖家检查后说是nano上少一根线,要把usb口背后的两个电容(C1...
D13 - Nano D13 - Pro D13 - Pro Mini D13 - UNO D13 - Yún D13 – Zero 如果你希望使用本代码来点亮外部的 LED,你是需要自己搭建电路的。首先把电阻的一只引脚连接到 LED_BUILTIN 常量所指定的数字引脚,然后把 LED 灯较长的一只脚与电阻相连,最后把 LED 较短的另一只脚(负极、阴极)接到 GND ...
现在,用导线连接操纵杆电位器到GND,5V和信号。然后将操纵杆和滑动开关螺丝固定在控制器中间。在顶部添加触发开关和电位器。最后,将Arduino NANO开发板粘在一个角落上。 好的,现在,非常重要的一步你要把小的buck转换器设置为3.3V,然后把电位计粘在一起。然后将其连接到NRF24模块。最后,将所有的电线连接到Arduino...