If IR_SEND_PIN is not defined (before the line #include <IRremote.hpp>) you must use e.g. IrSender.begin(3, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN); Old decode(decode_results *aResults) function is replaced by simple decode(). So if you have a statement if(irrecv.decod...
Arduino-IRremotePublic Infrared remote library for Arduino: send and receive infrared signals with multiple protocols People This organization has no public members. You must be a member to see who’s a part of this organization. Top languages ...
ESP8266 is supported in a fork based on an old codebase that isn't as recent, but it works reasonably well given that perfectly timed sub millisecond interrupts are different on that chip. Seehttps://github.com/markszabo/IRremoteESP8266 ...
我从GitHub下载了最新的IRremote扩展库：https://github.com/shirriff/Arduino-IRremote 拿了一个机顶盒的...
用于控制随意红外设备的Apple手表及iPhone应用。 IOS应用发送HTTP请求至一个或多个带有以太网插板的Arduino。Arduino正在解析http请求并发送红外信号。Arduino代码基于IRremote库(https://github.com/shirriff/Arduino-IRremote)。我使用三重红外发射线来给多个设备发送红外信号。
Please use one of the new code examples from the library, available at "File > Examples > Examples from Custom Libraries / IRremote". Start with the SimpleReceiver or SimpleSender example. The examples are documented here: <https://github.com/Arduino-IRremote/Arduino-IRremote#examples-for-this...
https://github.com/shirriff/Arduino-IRremote 使用到的硬件有:Arduino、38K红外接收模块、红外发射模块、屌丝空调、屌丝专用空调遥控器(也可以是电视或者其他的红外控制的电器) 下面正式开始了,本帖中我将以自己的屌丝空调为例。(补充下空调是长虹的1999元的空调,具体啥型号忘了) ...
GitHub - Arduino-IRremote/Arduino-IRremote: Infrared remote library for Arduino: send and receive infrared signals with multiple protocols 一个可能的问题是4.x版本与2.x版本由于架构改动较大,使用区别也较大,在4.x版本使用2.x的代码写法可能导致所有的键都解析为FFFFFFFF的情况,上图的参考写法见github,也...
用于控制任意红外设备的Apple手表及iPhone应用。IOS应用发送HTTP请求至一个或多个带有以太网插板的Arduino。Arduino正在解析http请求并发送红外信号。Arduino代码基于IRremote库(https://github.com/shirriff/Arduino-IRremote)。我使用三重红外发射线来给多个设备发送红外信号。
一.实物图二.例子代码注:git clonehttps://github.com/z3t0/Arduino-IRremote.git 放到Arduino 的libraries目录下面从遥控器上按0到9依次输出如下编码