44 http://code.google.com/p/arduino-pwm-frequency-library/downloads/list 老大，google上不去啊 32 楼主用的什么软件的呀？用逻辑测试仪测的引脚 19 这个我知道，置高置低，我想用的是用定时器1和2写pwm，用3，9，10，11引脚输出这个 不是很明白你的问题，delay不就算是定时
arduino-pwm-frequency-library Arduino 经典国外PWM频率控制库 arduino arduino pwm pwm2018-08-19 上传大小:13KB 所需:49积分/C币 BLHeli 套件历史 BLHeli 套件历史 上传者:jacklwb时间:2014-12-30 ESP8266_Thing:ESP8266 WiFi SoC的突破和开发板
For sending, the default software generated PWM has problems on AVR running with 8 MHz. The PWM frequency is around 30 instead of 38 kHz and RC6 is not reliable. You can switch to timer PWM generation by #define SEND_PWM_BY_TIMER.Bang...
Arduino and Simulink / change PWM frequency. Learn more about arduino, simulink, pwm, power_electronics_control, electric_motor_control, power_conversion_control Simulink
Since 0.4.3 (experimental) support to control the OE (Output Enable) pin of the PCA9635. This OE pin can control all LEDs simultaneously. It also allows to control multiple devices by connecting the OE pins. Think of simultaneous switching ON/OFF or get dimming with a high frequency PWM....
Step 2.1 PWM Configuration // pwm frequency to be used [Hz] // for atmega328 either 4k or 32kHz // esp32/stm32/teensy configurable driver.pwm_frequency = 20000; Here is a list of different microcontrollers and their PWM frequency and resolution used with the Arduino SimpleFOClibrary. MCU...
// pwm frequency to be used [Hz]// for atmega328 either 4k or 32kHz// esp32/stm32/teensy configurabledriver.pwm_frequency=20000; Here is a list of different microcontrollers and their PWM frequency and resolution used with the ArduinoSimpleFOClibrary. ...
library.//Please refer to root/Readme.md for a full description.//Includes: <Arduino.h> for Serial etc.#include <Arduino.h>//Include the header for the ModbusClient RTU style#include"ModbusClientRTU.h"//增添头文件#include"hal/uart_types.h"#include"driver/uart.h"#include"driver/gpio.h...
将TFT_eSPI、TFT_Touch、lv_arduino三个库放入到你的Arduino的Library文件夹下。 3.3.2 第2步(修改屏幕驱动库TFT_eSPI) 打开Arduino的Library文件夹下的TFT_eSPI目录,打开User_Setup_Select.h文件: 将第22行的 #include <User_Setup.h> // Default setup is root library folder注释掉为 ...
Contains the pid algorithm. it should be called once every loop(). Most of the time it will just return without doing anything. At a frequency specified by SetSampleTime it will calculate a new Output. Syntax: Compute() Parameters:None ...