A fatal error occurred: Could not open COM9, the port doesn’t exist Failed uploading: uploading error: exit status 2 Sketch 使用 289881 字节 (22%) 的程序存储空间。最大为 1310720 个字节。 全局变量使用 18376 字节 (5%) 的动态内存,留出 309304 个字节用于局部变量。最大值为 327680 字节。 esp...
Interestingly, just before the error message, Output reads: WARNING: ESP32-S2FNR2 (revision v0.0) chip was placed into download mode using GPIO0. esptool.py can not exit the download mode over USB. To run the app, reset the chip manually. To suppress this note, set --after option to...
在使用Arduino IDE进行开发时,如果遇到 collect2.exe: error: ld returned 1 exit status 的错误,这通常是由于链接器无法找到某些必要的定义或者库文件导致的。以下是一些可能的解决步骤: 检查代码中的外部变量和函数声明: 确保所有在头文件中声明的外部变量和函数都在相应的源文件中正确定义。 例如,如果你在 outer...
E:\示例\servoTest\ESP32_Servo.cpp:141:19: warning: control reaches end of non-void function [-Wreturn-type] exit status 1 Compilation error: 'ledcSetup' was not declared in this scope 原因:自动下载了最新的Arduino ESP32核心库,与老版本的核心库不一致,新的升级了。原来库函数ledcsetup()和ledc...
(1).先正常使用Arduino编译,看是否生成elf文件(我的情况是总会生成的),有的时候,有collect2.exe: error: ld returned 5 exit status错误。退出了。但是elf文件已经生成。 (2).运行elf2hex.bat文件,在目标中会出现hex文件。 参考: 【1】Arduino设置:...
921600 Description After Updated to 2.0.16, Error occurs and says " A fatal error occurred: No serial data received. Failed uploading: uploading error: exit status 2 " It happens when I activate USB CDC On Boot function. if I turn it Off, it is fine ...
(1).先正常使用Arduino编译,看是否生成elf文件(我的情况是总会生成的),有的时候,有collect2.exe: error: ld returned 5 exit status错误。退出了。但是elf文件已经生成。 (2).运行elf2hex.bat文件,在目标中会出现hex文件。 参考: 【1】Arduino设置:http://www.cnblogs.com/hyper99/p/Arduino-UNO-fang-zhen...
arduino nano上传错误:exit status 1 "exit status 1" 是 Arduino IDE 在编译和上传过程中的错误代码,通常它是一个泛指错误,没有特定的详细信息。在这种情况下,需要查看更多的错误信息,以便确定问题的原因。以下是一些可能的原因和解决方法: 代码错误:首先,检查代码是否有任何语法错误、拼写错误或其他问题。确保代码...
-esp32s2-elf/12.2.0/../../../../xtensa-esp32s2-elf/bin/ld.exe: cannot open output file C:\Users\���\AppData\Local\arduino\sketches\380FB105949861D657EF4FC8EC55D4AC/sketch_apr19a.ino.elf: No such file or directory collect2.exe: error: ld returned 1 exit status ...
意思是编译输出目录没有指定,会很慢;所以在.vscode/arduino.json中设置了output属性值,为了让编译缓存有地方存放,而不是每次都在TEMP目录生成一个新的。 结果再编译就报了开头那个构建时出错:exit status 1错误。 三、解决方法 发现编译输出路径不能有特殊字符,连+也不行,随后将路径改成全英文字母,编译/验证(Veri...