百度试题 题目ESP32forArduino程序中,采用LEDC方式进行模拟输出时,函数ledcSetup(channel,freq,bit_num)的参数中,freq的含义是? A. 通道编号 B. PWM的频率 C. 分辨率 D. PWM值 相关知识点: 试题来源: 解析 B 反馈 收藏
1|03、ledcWrite()函数 voidledcWrite(uint8_tchan,uint32_tduty) 指定的 LEDC 通道的输出占空比 第一个参数chan为我们指定的LEDC通道,第二个参数duty表示占空比,其取值范围与ledcSetup()函数的bit_num有关。 __EOF__
ledcSetup(channel, freq, resolution); // 设置通道参数 ledcAttachPin(pwmPin, channel); // 将引脚绑定到通道 } void loop() { for (int duty = 0; duty <= 255; duty++) { ledcWrite(channel, duty); // 改变占空比 delay(10); } } 3.关键函数 ledcSetup(channel, freq, resolution):配置通...
信息参考来源;https://docs.espressif.com/projects/esp-idf/zh_CN/v4.3.1/esp32/api-reference/peripherals/ledc.html#ledc-api-supported-range-frequency-duty-resolution 频率和占空比分辨率支持范围 ledcSetup(channel, freq, resolution);// 设置通道,频率,占空比分辨率 channel:通道0 -7 为高速通道,7-15 为...
uint32_t ledcSetup(uint8_t channel, uint32_t freq, uint8_t resolution_bits); 1. 2. channelLEDC通道号,取值0-15,共16个通道 freq待设置的PWM脉冲信号的频率 resolution_bits计数位数,即PWM信号的占空比的分辨率,例如 8,则占空比取值范围0~~ ...
在ESP32的Arduino框架中,LEDC(LED Control)库用于生成PWM信号。当需要将某个引脚与指定通道关联以实现PWM输出时,核心步骤如下:1. **ledcSetup(channel, freq, resolution)**:用于配置通道的PWM频率和分辨率,但不会直接映射到物理引脚。2. **ledcAttachPin(pin, channel)**:将物理引脚(`pin`)绑定到指定的PWM通...
ESP32 DEVKIT V1模块有30个GPIOs,只要能用作输出,就可用作PWM引脚以连接LED。 请打开并拷入如下代码: const int ledPin = 16; const int freq = 5000; const int ledChannel = 0; const int resolution = 8; void setup(){ ledcSetup(ledChannel, freq, resolution); ...
ESP32 DEVKIT V1模块有30个GPIOs,只要能用作输出,就可用作PWM引脚以连接LED。 请打开并拷入如下代码: const int ledPin = 16; const int freq = 5000; const int ledChannel = 0; const int resolution = 8; void setup(){ ledcSetup(ledChannel, freq, resolution); ...
#include <ESPmDNS.h> #include <stdio.h> /** * 舵机控制相关 */ class LedcServo { public: float freq = 50; int resolution = 8; float pwmBaseScale; float pwmMin; float pwmMax; int channel; int scale = 1; void setup(float freq, int resolution, int channel); ...
#include "esp32-hal-ledc.h" // 频率 #define FREQ 2000 // 通道 #define CHANNEL 0 // 分辨率 #define RESOLUTION 8 // LED引脚 #define LED 12 void setup() { ledcAttachChannel(LED, FREQ, RESOLUTION, CHANNEL); } void loop() {