From line broadening, it may be possible to predict the formation of secondary pores. Combined application of X-ray diffraction (XRD), transmission electron microscopy (TEM), and N2-adsorption desorption provides the details on the secondary pore structures. More work in this direction is in ...
The XRD technique was performed to examine phase formation behavior of the mixed powder. The SnO, anatase TiO2 and unknown phases, and small amount of SnO2 were present in all the heated powders. Finally, the XAS results showed that the formation of SnTiO3 phase from the reaction between ...
The structure, morphologies, composition, and properties of the as-synthesized SnS and SnS2 products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM)...
2, 2017 DOI: 10.1007/s11837-016-2227-0 Ó 2017 Her Majesty the Queen in Right of Canada Application of Advanced Characterization Techniques for Engineering Materials JIAN LI1,3 and JIANN-YANG HWANG2,4 1.—CanmetMATERIALS, Hamilton, Canada. 2.—Michigan Technological University, Houghton, MI,...
PPM: Parts Per Million RH: Rice Husk RHA: Rice Husk Ash ROT: Run-out Table SDS: Sodium dodecyl sulfate SS: Stainless Steel TC: Thermocouple TCs: Thermocouples UFC: Ultrafast cooling u-RHA: Unleached rice husk ash XRD: X-ray diffraction XRF: X-ray fluorescent ...
1a), which has been reported in a few previous studies. Characterization analyses, including XRD and TEM, were performed to confirm that the Te NWs were single-crystalline. Supplementary Fig. 1 shows the XRD patterns of the Te NW arrays. The XRD peaks of the Te NW arrays show good ...
In this study, natural bentonite was prepared and tested for the removal of diazo dye throughthe adsorption process. Investigated biosorbent was characterized using XRD, N2 sorption, XRF, total surface area using methylene blue method and TEM techniques. The effect of major parameters, such as ...
In this research, water extract fromleaves is employed as environmentally friendly methods to synthesize zinc oxide nanoparticles (Mo/ZnO-NPs), and characterized by TEM, EDX, FT-IR, and Zeta potential. Mo/ZnO-NPs exhibit a Zeta potential of 21.9mV, and X-ray diffraction (XRD) analysis ...
in a clean environment perspective. Nano-cellulose was extracted from Slender amaranthvegetable wastes as natural fiber for green composites preparation. The extracted nanofibers, leather waste composite, and the resulting nanocomposite material have been characterized using X-ray diffraction (XRD), Fourier...
Design, synthesis and characterization of the solid additives As illustrated in Fig.1a, we designed eight SA-x (x = 1 to 8) to have similar chemical structures to those of the end-groups of IT-4F, expecting that the SA-x had good miscibility with IT-4F molecules. The SA-x can ...