A projection X-ray microscope has been constructed by modifying a scanning electron microscope (HITACHI S-2500CX). Characteristic internal structures and their changes in an aphid, a fly, an ant, a water bear and a beetle are observed first, non-destructively, by X-ray microscope. Stereo-pair...
This chapter discusses the application of the scanning electron microscope (SEM) to the study of printability. It describes the interrelationships between pulp quality and the resultant print quality of the commercial newsprint made from it. By fractionating the groundwood and mixed stock going to ...
This facilitates the identification of the phases.In this work, investigations were carried out using a JSM-840 scanning electron microscope manufactured by the JEOL Co (Japan), with a system of microanalysers from the Link Systems Co (Great Britain). The resolving power of the microscope is ...
To identify the crystalline phase of the perovskite and AC, X-ray diffraction analysis was performed in the Tongda TD-3700 (China) using Cu Kα radiation (λ = 1.5406 Å) between 20° and 75°. The morphological studies of samples were carried out using a scanning electron microscope ...
The procedure for light microscopic examination consists of the following steps: collection of a finger-prick blood sample, preparation of thin and thick blood smears, staining of the smears with Giemsa stain, and examination of them under a microscope for the detection of malaria parasites ...
The application of digital speckle correlation method (DSCM) under scanning electron microscope(SEM) is studied in the paper.The process of a combination of the DSCM and SEM with servo is described.And the meso-scale and micro-scale deformation field measurement is implemented.The research extends...
扫描电化学显微镜技术理论及应用分析-theory and application analysis of scanning electrochemical microscope technology 第三章SECM定量分析理论423.1引言...423.2SECM相关理论数学模型42SECM暂态过程43SECM稳态过程453.2.3其它几何形状超微电极探针定量分析理论...523.2.4SECM定量分析理论的数值模拟研究533.3逼近曲线处理方法....
It introduces the principles that underlie X‐ray generation in the scanning electron microscope (SEM) and problems likely to be encountered in analysis. The chapter outlines the processes for element identification and quantification of results, and emphasizes the advantages and disadvantages for using ...
The geometry, size, and quality of constructions of 3D-printed molds were evaluated by using a Scanning Electron Microscope (FEI-Quanta 200). Before SEM imaging, all samples were fixed on a sample holder and coated with a gold thin film layer for 120 s. ...
produce better film formation at higher potential20. This film modifies the structure and solid/electrolyte film and subsequently improves LIB cycle performance which is reflected in the further studies by scanning electron microscope (SEM) imaging (Fig.8) and electrochemical impedance spectroscopy (Fig...