*/intmain(void){#ifdefined(TRACE_UART)// Configure and make UART ready for usage.constapp_uart_comm_params_tcomm_params = { RX_PIN_NUMBER, TX_PIN_NUMBER, RTS_PIN_NUMBER, CTS_PIN_NUMBER, APP_UART_FLOW_CONTROL_DISABLED,false, UART_BAUDRATE_BAUDRATE_Baud38400 };uint32_terr_code;APP_U...
APP_UART_FLOW_CONTROL_DISABLED,false, UART_BAUDRATE_BAUDRATE_Baud38400 }; APP_UART_FIFO_INIT(&comm_params, UART_RX_BUF_SIZE, UART_TX_BUF_SIZE, uart_event_handle, APP_IRQ_PRIORITY_LOW, err_code); APP_ERROR_CHECK(err_code); }/**@snippet [UART Initialization]*/...
APP_UART_FLOW_CONTROL_ENABLED,false, UART_BAUDRATE_BAUDRATE_Baud38400 }; APP_UART_FIFO_INIT(&comm_params, UART_RX_BUF_SIZE, UART_TX_BUF_SIZE, uart_error_handle, APP_IRQ_PRIORITY_LOW, err_code);APP_ERROR_CHECK(err_code);//nrf_drv_gpiote_out_config_t config = GPIOTE_CONFIG_OUT_TASK...
My application is using the FIFO UART module to communicate with another MCU. It is also running softdevice S132 v2.0.0. While most of the time everything runs
刷刷题APP(shuashuati.com)是专业的大学生刷题搜题拍题答疑工具,刷刷题提供对串口的配置时,其中 uartConfig.flowControl=false;的功能是( )。A.波特率配置B.打开串口C.不使用流量控制D.回调上面声明函数的答案解析,刷刷题为用户提供专业的考试题库练习。一分钟将考试题Wor
static void action_uart_deactivate(void) { m_current_state = UART_OFF; NRF_UART0->TASKS_STOPTX = 1; NRF_UART0->TASKS_STOPRX = 1; NRF_UART0->ENABLE = (UART_ENABLE_ENABLE_Disabled << UART_ENABLE_ENABLE_Pos); }void action_tx_stop() ...
- Hardware flow control disabled (RTS and CTS signals) - Receive and transmit enabled */ USART_InitStructure.USART_BaudRate = 115200; USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; ...
static void uart_init(void) { uint32_t err_code; const app_uart_comm_params_t comm_params = { RX_PIN_NUMBER, TX_PIN_NUMBER, RTS_PIN_NUMBER, CTS_PIN_NUMBER, APP_UART_FLOW_CONTROL_DISABLED, false, UART_BAUDRATE_BAUDRATE_Baud115200 ...
master ble_app_uart__saadc_timer_driven__scan_mode pca10040 pca10056 pca10100 README.md main.c nrfx_saadc_continuous_sampling nrfx_saadc_multi_channel_ppi nrfx_saadc_simple_low_power_app_timer nrfx_saadc_simple_low_power_app_timer_multichannel_oversample ...
void uart_init(u32 bound){ //GPIO端口设置 GPIO_InitTypeDef GPIO_InitStructure; USART_InitTypeDef USART_InitStructure; NVIC_InitTypeDef NVIC_InitStructure; RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOA, ENABLE); //使能USART1,GPIOA时钟 ...