This utility is for IPv4 only. NOTES: • In firmware version v1.4.x and higher, it is not supported to assign IP addresses to Network Management Cards using the Wizard. • You cannot search for assigned devices already on the network using an IP range unless you enable SNMPv1 and set...
Issue An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP add
This method is not supported on the Network Management Card for Easy UPS ISX Manager offers a mass configuration utility. Please reference the User Guide for the ISX Manager for information on performing the mass configuration.NOTE: The mass configuration option in ISX Manager uploads specific set...
APC Smart-UPS C SMC1500 features pure sine wave output on battery, simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Network manageableMost models provide remote power management options of the UPS over the network. Many do not have NMC embedded. LED status indicatorsQuickly understand unit and power status with visual indicators. Audible alarmsProvides notification of changing utility power and UPS conditions. ...
Ideal for servers, point-of-sale, routers, switches, hubs, and other network devices. Standard Features High-efficiency Green Mode: Optimum efficiency which saves utility and cooling costs Emergency Power Off (EPO): Provides for remote UPS shut-off...
Click the Ping button to assure you have connectivity with the card to be upgraded. Click “Upgrade Now” button. If successful, the utility will report “Device(s) Successfully Updated”. You can now log in to your UPS Network Management Card 2. Released for:APC New ZealandPublished...
The Device IP Configuration Wizard is a Windows application designed specifically to remotely configure the basic TCP/IP settings of Network Management Cards. The Wizard is included on the CD bundled with the cards, and available to download from the. This utility supports NMC1/NMC2 cards that ...
v3 of this utility also supports pushing/uploading .csf files, as outlined in, for v6.X.X NMC2 devices, and NMC3 devices for mass configuration of user management. (This file is for upload only.) You should have (5) files once the utility is uncompressed: ...
Issue You wish to upgrade your Network Management Card's (NMC) firmware or have been instructed to.You have a device such as a Rack PDU, AV unit, or environmental