ap-mode-switch check 命令功能 ap-mode-switch check命令用来检查AP是否允许在FIT AP和FAT AP形态之间进行切换。 仅AP5030DN、AP5130DN、AP4030DN、AP4130DN、AP5030DN-S、AP3030DN、AP9131DN、AP9132DN、AP4030DN-E、AP3010DN-V2支持该命令。 命令格式...
ap-mode-switch check Function The ap-mode-switch check command checks whether an AP allows for switching between a Fit AP and a Fat AP. Only the AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP5030DN-S, AP3030DN, AP9131DN, AP9132DN, AP4030DN-E, and AP3010DN-V2 support this command...
Also, you can check the sh file that use that configuration file: /system/etc/miio_client/wifi_start.sh Also, that AP mode could be from that an hostapd configuration: /usr/share/hostapd_wpa2.conf Used in correlation with udhcpd_wpa2.conf to assign dhcp address and dhcp options... hu...
执行命令ap-mode-switch prepare后,需要再次执行命令ap-mode-switch check,确保允许AP从FIT AP切换为FAT AP。 使用实例 # 配置FIT AP准备切换成FAT AP。 <HUAWEI>system-view[HUAWEI]ap-mode-switch prepareInfo: Prepare is ok, Use ap-mode-switch command to switch to fat ap. ...
In this case, you can run the display ap non-fit-mode all command to check the Fat APs and cloud APs detected on the network and determine whether the AP's working mode is incorrectly switched based on AP information. If so, run the ap mode-switch fit command to switch the working ...
2: Configuration level Usage Guidelines Usage Scenario If the working mode of a Fit AP is switched to the Fat or cloud mode, the AP cannot be managed by the device. In this case, you can run thedisplay ap non-fit-mode allcommand to check the Fat APs and cloud APs detected on the ...
It has been confirmed that the file system allows switching between a Fit AP and a Fat AP using the ap-mode-switch check command. Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN, AP5010DN-AGN support this command. Example # Use the TFTP server (192.168.1.1) to sw...
It has been confirmed that the file system allows switching between a Fit AP and a Fat AP using the ap-mode-switch check command. Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN, AP5010DN-AGN support this command. Example # Use the SFTP server (192.168.1.1) to sw...
The ap-mode-switch check command checks whether the file system on an AP allows switching between a fit AP and a fat AP. Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN, AP5010DN-AGN support this command. Format ap-mode-switch check Parameters None Views System ...
The ap-mode-switch check command checks whether the file system on an AP allows switching between a fit AP and a fat AP. Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN, AP5010DN-AGN support this command. Format ap-mode-switch check Parameters None Views System ...