关于锐捷交换机中的anti-ARP spoofing功能说法正确的是()。A.可以完全杜绝ARP欺骗B.只能保证用户对应网关设备的ARP表正确C.只能保证网关设备对应用户
单项选择题关于锐捷交换机的命令“anti-arp-spoofing ip 1.1.1.254.下列说法正确的是()。 A.在命令在全局模式下“SWITCH(config)#“下配置,若设备瘦到源ip 为1.1.1.254发出的arp报文则丢弃 B.在命令在全局模式下“SWITCH(config)#“下配置,作用是将1.1.1.254配置为可信任ip,改ip发出的所以arp报文不做检测 ...
关于锐捷交换机的命令“anti-arp-spoofing ip 111254下列说法正确的是—();在命令在全局模式下“SWITH(config)#“下配置,若设备瘦到源ip为111254发出的arp报文则丢弃;在命令在全局模式下“SWITH(config)#“下配置,作用是将111254配置为可信任ip,改ip发出的所以arp
防网关ARP欺骗功能(Arp-anti-spoofing)的原理是()。 A. 通过ACL将SenderIP为网关IP的ARP报文全部丢弃掉 B. 通过ACL将SourceIP为网关IP的IP报文全部丢弃掉 C. 通过ACL将TargetIP为网关IP的ARP报文全部丢弃掉 D. 通过ACL将DestinationIP为网关IP的IP报文全部丢弃掉 E. 这种功能只能防护受害主机的网...
关于锐捷交换机的命令“anti-arp-spoofing ip 1.1.1.254.下列说法正确的是—() A 在命令在全局模式下“SWITCH(config)#“下配置,若设备瘦到源 ip 为 1.1.1.254 发出的 arp 报文则丢弃 B 在命令在全局模式下“SWITCH(config)#“下配置,作用是将 1.1.1.254 配置为可信任ip,改 ip 发出的所以 arp 报...
spoofing. Common types of spoofing are IP address spoofing attacks, Address Resolution Protocol (ARP) spoofing attacks (modified MAC address), and Domain Name Server (DNS) server spoofing attacks (DNS server is modified to redirect specific domains to a different IP address). DNS server spoofing ...
ARP spoofing allows an attacker to intercept data frames on a network, modify the traffic, or stop all traffic. Often the attack is used as an opening for other attacks, such as denial of service, man in the middle, or session hijacking attacks. This anti- ARP spoofing program, (shARP)...
A system and method that provides for copying ARP replies, and generating data packets which include the ARP reply, and other information such as an identification of the port on the ARP reply was received. These data packets are then transmitted to an ARP collector which stores the ARP reply...
the ability to select which devices gain access to the network. The second area is the elimination of spoofing attacks, such as denial-of-service attacks, at Layer 2. To achieve these goals, two caches of information must be built: the MAC-IP Anti-Spoof Cache, and the ARP Cache. ...
Anti-ARP Sniffer Introduction ARP (Address Resolution Protocol) is a protocol used to resolve IP addresses to MAC addresses on a local network. It is a critical part of the network communication process. However, ARP can be vulnerable to attacks, such as ARP spoofing or sniffing, where an ...