the socket normally has enough bite on the nut to remove the nut with the locking plate as one unit. If you are removing without an impact wrench, bend in the outer rim of the locking plate with a screw driver or similar
impact wrench or chisel, and more. Whilst it is true that an electric portable air compressor is powered via an electric cable, so needs an electrical outlet, there is no need to feel limited by this. In fact, aportable compressoris considered to be a lifesaver for many trade professionals...
The mounting bolt required an Allen wrench, so I swapped it out for a thumbscrew that can be tightened and loosened by hand. Because my bike is a seven-speed with a shifter that gobbles up extra space on the right handlebar grip, the throttle was a little awkward when mounted there, s...
My second improvement was to heat the boards hotter and set the ink better in hopes it would adhere to the boards better. This was an easy fix as I found a coupon for a dual temperature heat gun at Harbor Freight Tools. This heat gun cost me $10 and has two settings of 570 degrees...