which the fluid is pumped up from the reservoir by a pump (38), and the vehicle deceleration or an operating speed of a pump motor (52), so that an amount of the fluid stored in the reservoir is estimated on the basis of the amounts of the flow flows into and from the reservoir....
According to the characteristics and requirements of the brake caliper required fluid amount test, this paper puts forward a test-bed project using gear flow meter, including the determination of the structure, the selection of gear flow meter and pressure device etc. Comparing with the traditional...
全部费用大概需要2250人民币 the maintenance project in the first 100,000 kilometres is including the replacement engine machine oil, the oil filter, the air cleaner, the complete igniter plug, changes speed fuel tank (AT), changes the boost oil (fluid) and the entire vehicle brake fluid, the...
<div p-id="p-0001">A system <b>18 </b>for controlling a safety system of an automotive vehicle has a first controller <b>76 </b>generating a first control signal, a second controller <b>78 </b>generat
In the method, the difference between pedal strokes of a brake line under the same oil pressure before and after closing an oil circuit is calculated, so as to obtain, by conversion, the amount of fluid required for a corresponding brake under this oil pressure value. Firstly, the mounting ...