I am trying to install Win 10/11 on a Gigabyte B450M K with samsung evo M.2 nvme sata. Disk is recognized in BIOS. Whether i choose "Enable RAID" or not, which i suppose is AHCI, the installers are not finding any disk to install to. I tried to load Gigabyte's RAID drivers wi...
[translate] aAMD AHCI Driver (Preinstall driver, press F6 during Windows* setup to read from floppy) AMD AHCI司机 (事先装配司机,按F6在Windows*设定期间从磁盘读)[translate]
The SATA Controller and your Display AMD Driver. If you are trying to install STOREMI, I believe you need to set the SATA CONTROLLER to AHCI Mode and not RAID Mode. STOREMI doesn't work if you enable the RAID MODE for SATA: Also in BIOS it has a Windows 10 settings: If everything ...
发布日期:2020/11/02 文件容量:4MB 驱动种类:官方正式版 适应硬件:主板驱动 驱动说明: AMD AHCI driver V1.2.1.376 for Windows Win7 32bit & Win7 64bit---(WHQL).AMD AHCI driver V1.3.1.220 for Windows Win8.1 32bit---(WHQL).AMD AHCI driver V1.3.1.245 for Windows Win8.1 64bit---(WHQL)...
a测量对照表 Survey comparative table[translate] aAMD SATA AHCI Driver (Preinstall driver, press F6 during Windows* setup to read from floppy 正在翻译,请等待... [translate]
发布日期:2020/11/02 文件容量:4MB 驱动种类:官方正式版 适应硬件:主板驱动 驱动说明: AMD AHCI driver V1.2.1.376 for Windows Win7 32bit & Win7 64bit---(WHQL).AMD AHCI driver V1.3.1.220 for Windows Win8.1 32bit---(WHQL).AMD AHCI driver V1.3.1.245 for Windows Win8.1 64bit---(WHQL)...
1、Windows7下最好在安装系统前在 BIOS 开启 AHCI 再安装,如已经装系统了可以修改注册表 HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci 里面的 Start 改为 0不然在开机进系统中途会蓝屏重启的。好,说我的安装过程吧,我先在 BIOS 开启了 AHCI 模式再进行安装 WIN7,进系统后桌面下 方显示类似 U 盘和可...
04-17-2012 11:30 AM Yes - I am inclined to go back to MS AHCI. I undertand that TRIM and NCQ are only passed to the non-RAID volumes under the Intel platform. Do you know if that is also true of the ahci64x.sys driver? Idealy, I would still have the non-raid volumes...
今天是看到amd官网更新了主板芯片组驱动,发现里面已经完全去除了win8时出的2015年 1.3.1.276 sata ahci驱动,只有win7用的2013年 1.2.1 sata驱动,这下官方是推荐win10只能用系统自带驱动了,本来win10下运行驱动安装程序里面也不会出现sata安装选项。 大家还是按照官方的来吧,不要再去手动安装sata驱动,甚至强行安装...
04-17-2012 11:30 AM Yes - I am inclined to go back to MS AHCI. I undertand that TRIM and NCQ are only passed to the non-RAID volumes under the Intel platform. Do you know if that is also true of the ahci64x.sys driver? Idealy, I would still have the non-raid volumes...