Ni-Cr and Ni-Cr-Fe alloys are soldered by means of an alloy of 92-95 per cent Pd and 5-8 per cent Al; or 0.5-95 per cent Pd, 0.1-8 per cent Al and the balance Ag or Au or both, the Pd being replaced, if desired, in an amount up to 10 per cent by Pt provided the ...
percent nickel and 10 percent chromium that is used to make the positive conductors of ANSI Type E (chromel-constantan) and K (chromel-alumel) thermocouples. It can be used up to 1100 °C in oxidizing atmospheres. Chromel is a registered trademark of the Hoskins Manufacturing 正在翻译,请...
The alloy of copper, nickel, silicon and chromium is characterised in that it includes, by weight, from 3.5 to 6 % of nickel, from 0.8 to 1.5 % of silicon, from 0.3 to 1.2 % of chromium, the remainder consisting of copper. The production process consists in heating the composition defin...
The apoptosis rate of nickel-chromium alloy is higher than the negative control group's (P05). 镍铬合金引起的凋亡率最高且远高于阴性对照组,有显著性差异(P0.05)。 www.fabiao.net 2. The influence of voltage on performance of gold coating which on the surface of Nickel-chromium alloy 电压对烤...
M.Blair, inEncyclopedia of Materials: Science and Technology, 2001 1.2Heat Resistant Alloys HK is the designation of a heatresistant alloy. The H indicates that the grade is a heat resistant alloy. The letter K indicates the chromium and nickel content of the alloy; again it gives only an ...
2. 铬镍合金 镍铬合金基底,nickel... ... ) Ni-Cr alloy 镍铬合金 ) chromium-nickel alloy 铬镍合金 ) chromium nickel alloy 铬-镍合金 ... www.dictall.com|基于5个网页 例句 释义: 全部,镍铬合金,铬镍合金 更多例句筛选 1. High chromium-nickel alloy side electrode maintains. 高质量铬镍合金侧...
Nickel-Chromium Alloy Casting ASTM B865 Uns N0550 Dental Alloy US$50.00-95.00 10 kg (MOQ) Product Details Customization: Available Application: Aviation, Electronics, Industrial, Medical, Chemical Standard: DIN, ASTM, AISI Contact Supplier Chat Still deciding? Get samp...
Nickel-chrome & Nickel-chrome-Iron alloy wire Nickel chromium and nickel chromium iron alloy is the most widely used high resistance alloys for electrical heating, the alloy has higher resistivity, good oxidation resistance and wear resistance, good mech
Abradable seals for compressors and turbines are made of fibers and powders of an alloy consisting essentially of iron, nickel, chromium, aluminum, and yttrium. The alloy preferably contains 22-27 weight percent nickel, 18-22 weight percent chromium, 9-15 weight percent aluminum, 0.0005-0.05 weig...
NF A04-504 铜和铜合金.晶粒大小平均值的评定 (Copper and copper alloys. Estimation of average grain size.) NF A04-505 铝、铜、镍及其合金制半成品.粒径的测定.镍和镍合金 (Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel allo...