a汽缸体的特征 Cylinder block characteristic [translate] aAllowable ultimate bearing stress for bolts as well as members is equal to one point zero (1.0) times the ultimate stress Fu of the steel. 允许的最后承压应力为螺栓并且成员与一点零(1.0)倍是相等的钢的最后重音Fu。 [translate] ...
a丹尼比我以前认为的更聪明 Denny compared to me before thinks intelligently [translate] aAllowable ultimate stress in tension and compression on extreme fibres is equal to the yield point Fy of the steel. 允许的最后重音在紧张和压缩在极端纤维与钢的让步Fy是相等的。 [translate] ...
In the AWSDM, the structural design criterion is that the working stress under the applied design loads must be smaller than an allowable stress. On the other hand, the ultimate limit state based design method (ULSDM) is based on the criterion of the ultimate limit state or ultimate ...
While the ultimate strength or maximum load-carrying capacity of the structure has never been realized as far as the allowable working stress based design method is applied, this study starts with identifying it by the nonlinear finite element method. The structural weight was then attempted to ...
aAllowable ultimate shearing stress for bolts and members is equal to zero point six (0.6) times the ultimate stress Fu of the steel. 允许的最后抗剪应力为螺栓和成员与零的点六(0.6)时间是相等的钢的最后重音Fu。[translate]
reduction for holes. In case of a single angle member connected by one flange only, the net area shall be reduced by 10 %. For connections with one bolt only, the net area shall be reduced with 30 %. Allowable ultimate tensile stress is equal to 重音在紧张成员从净区域将被计算在减少...