Suggestion Power off the device (turn off the AC switch and DC switch, and wait for a period specified on the device safety warning label), and then perform the following operations: Check whether the DC terminals are connected in series. If yes, adjust the DC bus cable connection.Translatio...
Ensure that the number of connected battery racks does not exceed the upper limit. For details, see the user manual of the device. If the fault persists, contact the vendor or technical support. 9 Check whether the BAT terminals are correctly and securely connected. ...
Central alarm for domotic installations of european bus, those designed to allow the final contracting with the user of security companies, avoiding the incorporation of a complex wiring, characterized by being constituted from a body (2) in which incorporates a control unit (3) and an actuator ...
Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable ...
(LNG) and petroleum ships, onshore oil and gas processing plants, including oil and gas terminals, petrochemicals Oil refineries and power companies, ships, offshore drilling platforms, offshore platforms, oil refineries, petroleum, petrochemical, natural gas, military, thermal power, nuclear power,...
The GG25L restarts when the BATD/CD level returns below the threshold, in the same way as for a power-up sequence. Using the 1-s filter prevents false battery swap detection if short contact bouncing occurs at the battery terminals due to mechanical vibrations or shock...
1. Central alarm for home automation facilities European bus, designed to allow the end user contracts with security companies, bypassing the incorporation of complex wiring, characterized by being formed from a body (2) wherein a central (3) and an actuator (4) or switch module domotic ...
Check whether the OT/DT terminals are crimped as required. Check that the fastening torque of wiring terminals meets the requirement. Turn on the AC switch and DC switch, and restart the device. If the fault persists, contact your dealer or technical support.Translation...
Suggestion Power off the device (turn off the AC switch and DC switch, and wait for a period specified on the device safety warning label), and then perform the following operations: Check whether the DC terminals are connected in series. If yes, adjust the DC bus cable connection.Translatio...
Ensure that the number of connected battery racks does not exceed the upper limit. For details, see the user manual of the device. If the fault persists, contact the vendor or technical support. 9 Check whether the BAT terminals are correctly and securely connected. ...