The pipe has a tab (19) bearing the aerosol jet to clip into a holding tag (28) on the i... GEIER ADALBERTO,KOHN UDO 被引量: 11发表: 1996年 Health and safety issues in post-consumer aerosol container recycling Post-consumer aerosol cans are being recovered for recycling through material...
Production capacity:3000-5000cans/shift(8 hours);Max Gas volume(ml):20-500ml;Working Pressure:0.6-1.0Mpa;Air consumption:0.9(m3/min);Applicable aerosol can diameter:45-65mm;Applicable aerosol can height:80-350mm;Available valve:1 (25.4mm);Liquid vol...
A dispensing device (1) for spray cans filled with a flowable product under gas pressure is specified, having a product path (14) which can be closed by a dispensing valve (5) and has a throttle nozzle arrangement which has on its entry side at least one entry channel (23), arranged ...
There is a liquid filter at the end of feed-in tube, prevent impurity into the cans. The sealing machine adopts mechanical motion control, simple air channel, rational Structure, adjustment is convenient, the sealing head is made of high quality sta...
As is common with aerosol cans, it is desirable to shake the device 22 for a few seconds prior to depressing the nozzle control member 28. If a relatively fine texture is desired, then a smaller diameter tube such as at 24a is used. For spray texture patterns having larger particle size...
Driven by an explosion-proof motor, this machine automatically sorts aerosol cans and walks on the conveyor line in order, without can squeezing, jamming, or inversion, and the speed can be adjusted as needed. The can feeder imitates the imported line. 2.4-head inflat...
A safety cap for aerosol cans incorporating a central integral depending split cylinder having inwardly direct hooked lower edges engageable beneath the valve surrounding bead on conventional aerosol cans. The hook ends of the cylindrical sections are locked beneath the can bead by an encircling ring...
Holder for aerosol spray cans comprises L-shaped bracket, on which can stands, magnet on vertical arm preventing can from tipping and adhesive strip on bac... The holder for aerosol spray cans comprises an L-shaped bracket (1), on which the can stands. A magnet (2) on the vertical arm...
The support (1) has two successive inclined planes and the upper plane is steeper than the lower plane. The cans (2) slide down the support, under gravity, towards the lower plane which gives the cans the desired position, with their caps (4) visible. The front end of the lower plane...
As is common with aerosol cans, it is desirable to shake the device 22 for a few seconds prior to depressing the nozzle control member 28. If a relatively fine texture is desired, then a smaller diameter tube such as at 24a is used. For spray texture patterns having larger particle ...