`syntax error' I want to simulate the slot_coupling 3dB hybrid coupler in ADS. Firstly, the coupler was drawn in layout window, and good results could be obtained, then created the coupler to a component, but after calling the component in schimatic window, the simulation cann't be comple...
--- Simulation terminated due to error. --- In the simulation message at the first line, you can see the following: Code: Highest frequency in data is 1.1e+09 Hz, which is smaller than the maximum source bandwidth 8.72e+09 Hz. In my circuit, ...
(C) Typical value only for information, provided by design simulation. (2) Ideal input span, does not include gain or offset error. (3) LSB = least significant bit. (4) This parameter is the endpoint INL, not best-fit INL. (5) Gain error is calculated after adjusting for offset ...
error temperature drift All input ranges, external reference All input ranges, internal reference –14 ±6 ±10 14 ppm/°C B B EO Offset error Input range = ±10 V Input range = ±5 V –1.8 –1.8 ±0.15 ±0.15 1.8 mV 1.8 B B Offset error matching (channel-to-channel) All input ...
(B) Limits set by characterization and simulation, across temperature range. (C) Typical value only for information, provided by design simulation. (2) Ideal input span, does not include gain or offset error. (3) LSB = least significant bit. (4) This parameter is the endpoint INL, not ...