aftersolderinginaccordancewithJ-STD-003,MethodsA,B, C,orDwithnoacceleratedaging. 5.2Test 5.2.1Pressastripofpressuresensitivetape,50mm [1.97in]minimuminlength,firmlyacross the surface of the test area removing all air entrapment. The time between appli- cation and removal of tape shall be less ...
ASTM D3359 is known as the Standard Test Method for Measuring Adhesion by Tape Test. Advertisement Corrosionpedia Explains Tape Adhesion Test The tape adhesion test has two methods, which can be performed either in laboratories or at job sites. The X-cut tape test is used at job sites. Usin...
1. Cross-cut test by tape test method ASTM D3359 — Standard test methods for rating adhesion by tape test This test method covers procedures to assess the adhesion of coating films to metallic substrates. This is done by applying and removing pressure-sensitive tape over cuts made in the fi...
The ATSM chart was extracted, with permission, from D 3359-02 Standard Test Methods for Measuring Adhesion by Tape test, © ASTM International. 100 Barr Harbor Drive, West Conshohocken, PA 19428Contact techsale@defelsko.com with specific questions or to request additional information....
1. Scope 1.1 These test methods cover procedures for assessing the adhesion of coating ?lms to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the ?lm. 1.2 Test Method A is primarily intended for use at job sites while Test Method B is more suitable ...
depends upon the inspector’s experience. A coating which has a high degree of cohesive strength may appear to have worse adhesion than one which is brittle and hence fractures easily when probed. There is no known correlation to other adhesion test methods (pull-off adhesion test, tape, etc...
Material in this Test Methods Manual was voluntarily established by Technical Committees of IPC.This material is advisory only and its use or adaptation is entirely voluntary.IPC disclaims all liability of any kind as to the use,application,or adaptation of this material.Users are also wholly ...
ASTM D3359 is a standard test methods for measuring adhesion by tape test. This test assesses the adhesion of film coatings to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film. This test method is also known as the Cross Hatch test. ASTM D3359...
Pull test #1. Cross-cut method ASTM D3359 - Standard Test Method for Evaluating Adhesion by Tape Test These test methods cover procedures for evaluating the adhesion of coated films to metal substrates by applying and removing pressure-sensitive adhesive tape over cuts in the film. ...
a first unit configured to attach a tape to the first surface; a second unit configured to detach the tape from the first surface; a second imaging device configured to photograph the first surface after detaching the tape to obtain a second image; and a controller configured to compare the ...