connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. #> $ adb connect 127.0.0.1:59865 already connected to 127.0.0.1:59865 $ adb connect 192.168.17.39 connected to 192.168.17.39:5555 $ adb devices List of devices attac...
adb -s <specific device> 命令指定设备,有多个模拟器或手机,当使用adb命令的时候就需要指定目标设备。 网络命令: adb connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. adb disconnect [<host>[:<port>]] - disconnect from ...
ADB always tries to connect todevice-1without success because it is unauthorized (i.e. bad ADB key), but since the server fordevice-1is now started, a TCP connection is still set up about every 300 ms, and the server logs them at the same rate (i.eNew remote ADB connection from :...
C:\Users\Administrator>adb Android Debug Bridge version1.0.41Version29.0.6-6198805InstalledasD:\android-sdk-windows\platform-tools\adb.exeglobaloptions:-a listen onallnetwork interfaces,notjust localhost-d use USB device(errorifmultiple devices connected)-e use TCP/IP device(errorifmultiple TCP/IP ...
Connect your device to your Mac with a compatible USB cable. Change the USB connection mode to “file transfer (MTP)” mode. This is not always required for every device, but it's best to just leave it in this mode, so you don't run into any issues. ...
connect HOST[:PORT] connect to a device via TCP/IP [default port=5555] disconnect [HOST[:PORT]] disconnect from given TCP/IP device [default port=5555], or all forward --list list all forward socket connections forward [--no-rebind] LOCAL REMOTE ...
Type in ./adb shell getprop and execute to get information about the connected device. Note: Make sure to authorize the physical device. Nice job! You executed a command on your connected device. Now, try doing the same when you have multiple devices connected. Connect another physical device...
Connect your device to the Windows 11 PC using a USB cable, and change the USB mode to “file transfer (MTP)” mode. Your device will show a dialog asking permission for USB Debugging that allows debugging through this computer. Tap “OK” to continue. You can also check the box within...
connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. <!-- adb connect <host>[:<port>]通过TCP/IP连接设备,如果没有指定端口号,使用默认5555端口。 --> disconnect [<host>[:<port>]] - disconnect from a TCP/IP device...
connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. ...