Native ESP32-S3 USB Port: ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communi
Native ESP32-S3 USB Port: ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging. ...
espressif/arduino-esp32Host mode using MAX3421E controller should work with all chips. Device mode only support S2/S3/P4 and additional Tools menu are needed USB Mode=USB-OTG (TinyUSB)for S3 and P4 USB CDC On Boot=Enabled,USB Firmware MSC On Boot=Disabled,USB DFU On Boot=Disabled ...
S3-Box-2.5 ESP32-S3-Box-Lite ESP32-S3-DevKitC-1-N32R8 ESP32-S3-DevKitC-1-N8 ESP32-S3-DevKitC-1-N8R2 ESP32-S3-DevKitC-1-N8R8 ESP32-S3-DevKitM-1-N8 ESP32-S3-EYE ESP32-S3-USB-OTG-N8 Espressif ESP32-EYE Espressif ESP32-LyraT FeatherS2 FeatherS2 Neo FeatherS2 PreRelease ...
335 337 #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) 336 338 #define TUP_USBIP_DWC2 339 + #define TUP_USBIP_DWC2_ESP32 337 340 #define TUP_DCD_ENDPOINT_MAX 6 338 341 339 - #elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU...