int32_t ad9361_get_rx_rssi (struct ad9361_rf_phy *phy, uint8_t ch, struct rf_rssi *rssi) Gets the RSSI for the selected channel. Receives as parameters a structure that contains the AD9361 current state, the desired channel (1, 2) and a variable to store the RSSI. Returns 0 in...
en_dis_rx(struct ad9361_rf_phy *phy, uint32_t rx_if, uint32_t enable; int32_t ad93611rx1tx_channel_map(struct ad9361_rf_phy *phy, bool tx, int32_t channel; int32_t ad_rssi_gain_step_calib(struct ad9361_rf_phy *phy); int32_t ad9361_setdcxo_tune(structad9361_rf...
README.md UPDATE.BAT cal_ad9361.c example_pluto.py makefile pluto.py pluto_ramboot pluto_temp.sh pluto_triangle.py pluto_tx_data.py plutosdr_sweepTXLO power.c power_check.c runme0.sh ssh_config sshanalog update update_ip Latest commit ...
when I set Tx attenuation to 10~17, the received signal SNR is around 27 dB. However, as soon as I switch Tx attenuation to 18 dB, SNR decreases automatically to 22 dB, while RSSI is still higher that -55 dBm in both cases.
The default bandwidih is 20MHz and I can get a tx and rx rf bandwidth of 20M with init parameters as below. AD9361_InitParam default_init_param = { /* Device selection */ ID_AD9361, // dev_sel /* Identification number */
int32_t ad9361_get_rx_rssi (struct ad9361_rf_phy *phy, uint8_t ch, struct rf_rssi *rssi) Gets the RSSI for the selected channel. Receives as parameters a structure that contains the AD9361 current state, the desired channel (0, 1) and a variable to store the RSSI. Returns 0 in...
We read every piece of feedback, and take your input very seriously. Include my email address so I can be contacted Cancel Submit feedback Saved searches Use saved searches to filter your results more quickly Cancel Create saved search Sign in Sign up Reseting focus {...
int32_t ad9361_get_rx_rssi (struct ad9361_rf_phy *phy, uint8_t ch, struct rf_rssi *rssi) Gets the RSSI for the selected channel. Receives as parameters a structure that contains the AD9361 current state, the desired channel (0, 1) and a variable to store the RSSI. Returns 0 in...
1, //two_rx_two_tx_mode_enable *** adi,2rx-2tx--enablmodee 0, //one_rx_one_tx_mode_use_rx_num *** adi,1rx-1tx-mode-use-rx-num 0, //one_rx_one_tx_mode_use_tx_num *** adi,1rx-1tx-mode-use-tx-num 1, //frequency_division_duplex_mode...
1, //two_rx_two_tx_mode_enable *** adi,2rx-2tx--enablmodee 0, //one_rx_one_tx_mode_use_rx_num *** adi,1rx-1tx-mode-use-rx-num 0, //one_rx_one_tx_mode_use_tx_num *** adi,1rx-1tx-mode-use-tx-num 1, //frequency_division_duplex_mode...