ACLs control if routed packets have to be forwarded or blocked at the ingress or egress router interface. The router checks each packet to determine whether to forward or drop the packet based on the criteria specified in the ACL applied to the interface. ...
Cisco Packet Tracer 方法/步骤 1 实验拓扑图：2 配置设备ip及网关路由器ip配置： Router>enableRouter#conf terEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int f0/0Router(config-if)#ip add 192.168.1.1 255.255.255.0Router(config-if)#no shutRouter(config-if)#ex...
Router#conf t Enter configuration commands,one per line.EndwithCNTL/Z.Router(config)#hR1R1(config)#int f0/0R1(config-if)#ip add10.0.1.2255.255.255.0R1(config-if)#no shutR1(config-if)#int s1/0R1(config-if)#ip add10.0.2.1255.255.255.0R1(config-if)#clock r64000R1(config-if)#no sh...
IPV6实验报告 一、实验目的 在路由器接口上配置IPv6地址,配置RIP路由,实现全网互通 二、实验拓扑 三、 实验步骤 路由器R1的配置如下: Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Rout 职场 休闲 原创 guofuqiangboy ...
1 使用Cisco Packet Tracer6.3 2 实验使用拓扑 3 首先先查看许可文件情况enableshow license feature 4 需要激活2911路由器设备的许可操作步骤如下：Router>enableRouter#configure terminal Router(config)#license boot module c2900 technology-package securityk9PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING ...
Router 0的配置: Router>en Router#configure terminal Enter configuration commands, one per line.End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address10.1.1.1 255.255.255.0 Router(config-if)#no shutdown
Download Packet Tracer Lab with Initial Configuration This lab includes all configurations that you need for practice. Requirements The Server section contains four servers: Server0, Server1, Server2, and Server3. These servers respectively belong to the Sales, Marketing, Production, and Development ...
Enter configuration commands, one per line. End with CNTL/Z. yangyu-R0(config)#int fa 0/0 /配置FA0/0 端口 yangyu-R0(config-if)#ip add 192.168.2.1 255.255.255.0 yangyu-R0(config-if)#no shut /启用该端口 yangyu-R0(config-if)#int s 1/0 /配置serial1/0 端口 ...
(config-if)#no shutR2:Router>ENRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#h R2R2(config)#int s1/0R2(config-if)#ip add 10.0.2.2 255.255.255.0R2(config-if)#no shutR2(config-if)#int f0/0R2(config-if)#ip add 172.16.1.254 255.255.255.0R2...
Enter configuration commands, one per line. End with CNTL/Z. Router(config)#ip access-list extended 101 Router(config-ext-nacl)#no access-list 101 Router(config)#exit Pc1又可以成功访问服务器的www服务。 实验B DNS服务器配置 实验B 基础配置 各个主机ping通服务器192.168.1.2 ; 1、配置ACL限制远程...