A small amount (0.1 μg each) of mixture (EA, BCA, and ZnO-doped Co3O4) is uniformly pasted onto the AgE surfaces, and then placed into the oven at 70.0 °C for 12 h until the film is completely dry. An electrochemical cell is mounted with doped nanomaterials coated AgE as a ...
A method of making a treating wash includes mixing brass granules with acetone, mixing carbon nanotube material, iron pyrite granules and copper granules in the acetone brass mixture, and straining the liquid from the remaining solid material. Methods of
WS2, a member of the layered hexagonal family, is a promising nanomaterial with 0.62 nm interlayer spacing composed of covalently bonded S-W-S atoms, where each layer is weakly bonded by Van der Walls forces [15,16]. WS2 has no dangling bonds, which makes it extremely stable and non-...
and 250 °C. The response graph exhibits a typical volcano shape with an optimized operating temperature of 200 °C. The response at 200 °C is around 269% toward acetone gas at a concentration of 4.5 ppm. For such a low acetone concentration, a response of 269% is quite high, compared...
For each sample, the EDS spectroscopy measurements were done for several arbitrary points, which were chosen on the surface of the sample. Additionally, maps with a scan size of around 10 × 10 μm were performed to study elements distribution. The acquisition time for single-point measurement ...
It is reported that the value of nm increases by 1.52 × 10−5 for each 10 mg/dl increase in glucose concentration [116,117]. Change in nm causes changes in the scattering properties of particles suspended in the blood such as red blood cells which are occupying around 45% of the ...
As for calcined solids (Figure 2b), diffraction patterns are very similar to each other, exhibiting (111), (200), and (220) reflections ascribed to periclase. In a previous paper, Aramendia et al. [23], using 27Al NMR-MAS, demonstrated that the coordination of Al3+ changed from ...