[HUAWEI] access-user arp-detect default ip-address 192.168.1.1 (可选)为特定VLAN配置ARP探测的源IP地址和源MAC地址: plaintext [HUAWEI] access-user arp-detect vlan 10 ip-address 192.168.10.1 mac-address 00e0-fc11-1234 这条命令为VLAN 10的用户配置了ARP探测的源IP地址为192.168.10.1,源MAC地址...
加这个的原因是为了防止某些客户端不回源地址是0.0.0.0的arp探测报文，导致在认证设备上异常掉线。
access-user arp-detect default ip-address ip-address By default, the default source IP address of user status detection packets is 0.0.0.0. Configure the source IP address and source MAC address of user status detection packets in a VLAN. access-user arp-detect vlan vlan-id ip-address ip-...
access-user arp-detect vlan vlan-id ip-address ip-address mac-address mac-address access-user arp-detect fallback ip-address { mask | mask-length } access-user arp-detect default ip-address ip-address If two or more of the commands are configured, the source IP or MAC address with a ...
加这个的原因是为了防止某些客户端不回源地址是0.0.0.0的arp探测报文，导致在认证设备上异常掉线。
Run the display current-configuration | include access-user arp-detect vlan command to check whether the source IP address of ARP probe packets in the specified VLAN is configured. If not, go to step 3. If so, ensure that the source IP address is correct. NOTE: In an active/standby sw...
[Switch] access-user arp-detect vlan 10 ip-address 192.168.1.10 mac-address 00e0-fc12-3456 Verify the configuration. A user starts the 802.1X client on a terminal, and enters the user name and password for authentication. If the user name and password are correct, an authentication success...
Run access-user arp-detect vlan vlan-id ip-address ip-address mac-address mac-address The source IP address and source MAC address are specified for offline detection packets in a VLAN. By default, the source IP address and source MAC address are not specified for offl...
Run access-user arp-detect vlan vlan-id ip-address ip-address mac-address mac-address The source IP address and source MAC address are specified for offline detection packets in a VLAN. By default, the source IP address and source MAC address are not specified for offl...
Run access-user arp-detect default ip-address ip-address The default source IP address of offline detection packets is set. By default, the default source IP address of offline detection packets is 0.0.0.0. Run access-user arp-detect vlan vlan-id ip-address ip-address ...