A lot shallconsist of plates from the same heat, thickness, prior condition,and scheduled heat treatment and shall not exceed 15 tons [15Mg] in weight [mass].ABrinell hardness test shall be made oneach plate not tension tested and the results shall conform tothe hardness requirements given ...
12、ition,and scheduled heat treatment and shall not exceed 15 tons 15Mg in weight mass. A Brinell hardness test shall be made oneach plate not tension tested and the results shall conform tothe hardness requirements given in Table 2.1This specification is under the jurisdiction of ASTM Committe...
Strain-Control led Fatigue Behavior of ASTM A36 and A514 ~ r a d eF Steels and 5083-0 Aluminum Weld Materials For steel w e l d ~naterials,tensile and strain-controlled fatigue properties vary w i t h hardness and, although the hardness relationships for aluminum vary from steel, the ...
A lot shallconsist of plates from the same heat, thickness, prior condition,and scheduled heat treatment and shall not exceed 15 tons [15Mg] in weight [mass].ABrinell hardness test shall be made oneach plate not tension tested and the results shall conform tothe hardness requirements given ...
17、e made on each plate not tension tested and the results shall conform to the hardness requirementsgiven in Table 2.8. Number of Tests8.1 Except as allowed by 7.2, one tension test shall be taken from a corner of each plate as heat treated.9. Retest9.1 Plates that were subjected to ...