P. Wei, “Crack closure in 2219-T851 aluminum alloy,” Eng. Fract. Mech., 9 , No. 3, 725–734 (1977).Unangst, K. D., Shih, T. T., and Wei, R. P., "Crack Closure in 2219-T851 Aluminum Alloy," Engineering Fracture Mechanics, Vol. 9, No. 3, 1977, pp. 725-734....
铝合金 手工锻造和滚动环 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti(2219-T852/T851) 热处理溶液 机械应力释放和沉淀热处理, Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Z
铝合金 板材和板材 Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81片材溶液热处理 冷加工和沉淀热处理Alclad 2219-T851板材溶液热处理 应力释放 和沉淀热处理, Aluminum Alloy, Sheet and Plate,
中文标准名称:溶解沉淀热处理工艺制备的6.3Cu-0.30Mn-0.06Ti-0.10V-0.18Zr铝合金薄板和厚板(2219-T81/-T851)英文标准名称:Aluminum Alloy, Sheet and Plate 6.3Cu 0.30Mn 0.06Ti 0.10V 0.18Zr Solution and Precipitation Heat Treated (2219-T81/-T851)标准类型:V11发布日期:2011/7/8 12:00:00实施日期:...
摘要: 1.1 Form:This specification covers an aluminum alloy in the form of sheet and plate, clad on two sides.1.2 Application:These products have been used typically for cryogenic applications and where welding andmaximum corrosion resistance are required, but usage is not limited to such applicatio...
Creep crack growth rate data measured in 2219-T851 aluminum alloy at 175掳C in air are reported. 2219-T851 is found to behave as a typical creep brittle material in agreement with results derived from concepts of fracture mechanics of creeping solids. A unique correlation is shown to exist ...
Aluminum alloysCorrosion resistanceSpacelabStress corrosionAnodic coatingsPaintsSalt spray testsSpace environment simulationThe corrosion protection systems and wrought alloy selected for Spacelab 2219 applications were subjected to surface corrosion and stress corrosion salt spray tests or immersion in 3.5% ...
Aluminum 2219-T851 Close Analogs : Material NotesSeries, SubcategoryAlloy, AluminumMetal, Nonferrous
Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treateddoi:SAE AMS4144F本规范涵盖手工锻件和轧制环形式的铝合金.这些产品通常用于加工过程中易翘曲的结构零件,但用途...
Aluminum Alloy Sheet And Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87)SAE International