1、塑件外观表面有蚀纹面或火花纹面等特殊纹理，为了保证模具中塑件的顺利脱模和尽量减少模具对产品表面的影响，在设计脱模斜度时需要更加细致和谨慎。2、对于表面有特殊纹理的塑件，建议采用呈锥形的脱模斜面，以保证塑件在脱模过程中不会受到损伤。同时应该将脱模斜角控制在最小限度，以避免对产品表面...
需要蚀纹的外观面是否为装配好后的外露面,MT11020纹号要求脱模斜度大于3度,请处理小于3度的面5个回答 Require the appearance of the etch surface is assembled outside appearances Demoulding mt11020 pattern requires more than 3 degrees, deal with the surface of less than 3 degrees2013-05-23 12:21:3...
a需要蚀纹的外观面是否为装配好后的外露面,MT11020纹号要求脱模斜度大于3度,请处理小于3度的面 Needs to eclipse the grain the outward appearance surface whether for assembles after outside to make an appearance, the MT11020 grain number request drawing of patterns ascent is bigger than 3 degrees,...