ISO 898-1:2013(E) 28 © ISO 2013 – All rights reserved ⎯ diameter of any unthreaded shank d s ≈ d or d s > d; ⎯ bolts and screws with nominal length l ≥ 2,7d; ⎯ thread length b ≥ 2,2d; ⎯ studs with total length l t ≥ 3,2d; ⎯ studs with metal ...
ISO 898-1-1999 中文名称:碳钢与铸钢制造的紧固件机械性能 第1部分: 螺栓, 螺钉和螺拴 英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs中国标准分类(CCS): J13 国际标准分类(ICS): 21.060.10 发布日期: 1999 实施日期: 页数: 31 ...
英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread 中国标准分类(CCS):J13 国际标准分类(ICS):21.060.10
螺纹标准:ISO 公制粗牙,精度5g6g,符合ISO261、ISO 965、GB/T196和197 材料标准:高等级合金钢 机械性能:10.9级,按ISO898-1和GB/T 3098.1;根据国际标准,内六角沉头螺钉的头型构造决定了这种螺钉的极限拉力达不到ISO898-1和GB/T3098.1规定的相应级别的抗拉强度,标准直径的这类螺钉的极限抗拉强度一般为ISO898-1...
螺纹标准:ISO 公制粗牙,精度5g6g,符合ISO261、ISO 965、GB/T196和197 材料标准:高等级合金钢 机械性能:10.9级,按ISO898-1和GB/T 3098.1;根据国际标准,内六角沉头螺钉的头型构造决定了这种螺钉的极限拉力达不到ISO898-1和GB/T3098.1规定的相应级别的抗拉强度,标准直径的这类螺钉的极限抗拉强度一般为ISO898-1...
新版齿轮精度国际标准ISO1328—1∶2013(E)前不久已由国际标准化组织(ISO)在全球正式发布。旧版齿轮精度国际标准ISO1328-1∶1995(E)发布于1995年。我国现行齿轮精度国家标准GB10095.1—2008就是等效采用旧版齿轮标准。随着材料技术、信息技术和制造技术的迅猛发展,近20年来齿轮工程领域出现了许多新技术和新 DOI: CNKI...
内容提示: ISO 898-1:2013(E) 28 © ISO 2013 – All rights reserved ⎯ diameter of any unthreaded shank d s ≈ d or d s > d; ⎯ bolts and screws with nominal length l ≥ 2,7d; ⎯ thread length b ≥ 2,2d; ⎯ studs with total length l t ≥ 3,2d; ⎯ studs with...
英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread 中国标准分类(CCS):J13 国际标准分类(ICS):21.060.10
BS EN ISO 898-1-2013 中文名称:碳钢和合金钢制紧固件机械性能. 具有规定性能等级的螺栓, 螺钉和螺柱. 粗牙螺纹和细牙螺纹 英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread...
NF EN ISO 898-1-1999 中文名称:固定部件。金属用螺钉系列标准。 英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs. 中国标准分类(CCS):J13 国际标准分类(ICS):21.060.10 发布日期:1999...