E96 Series at ±1% Tolerance – Resistor values in Ω 1.0 1.02 1.05 1.07 1.1 1.13 1.15 1.18 1.21 1.24 1.27 1.3 1.33 1.37 1.4 1.53 1.47 1.5 1.54 1.58 1.62 1.65 1.69 1.74 1.78 1.82 1.87 1.91 1.96 2.0 2.05 2.1 2.15 2.21 2.26 2.32 2.37 2.43 2.49 2.55 2.61 2.67 2.78 2.8 2.87 2.94 3.01...
摘要: Reports on an Excel cell formula for the calculation of the nearest standard resistor value. Calculation of the interdependent component values; Prevention of the buildup of tolerance errors; Derivation of the mantissas for the sequences....
Reports on an Excel cell formula for the calculation of the nearest standard resistor value. Calculation of the interdependent component values; Prevention of the buildup of tolerance errors; Derivation...
The standard resistor values are organised into a set of series of values known as the E-series. The different values are spaced such that the top of the tolerance band of one value and the bottom of the tolerance band of the next one do not overlap....
Standard Resistor Values Not all thinkable values are available, in part caused by the fact that all resistors have some sorts of tolerance. For example, a 100 Ohm resistor with a tolerance of 10% can actually have an value between 90 Ohm and 110 Ohm. ...
www.vishay.com D/CRCW e3 - Sample Kit Vishay Sample Kit Standard Thick Film Chip Resistors D/CRCW 100 1 % e3 FEATURES • The kits contain 1/4 E96 series • The values specified ± 1 % tolerance and ± 100 ppm/K • AEC-Q200 qualified • For further information refer to data...
SPECIFICATIONS Laboratory kit Resistor type Temperature coefficient Tolerance Resistance range / E-series Number of resistance values Resistors per value / total Number of dividers / pages LAE2A CHIP 0402 D10/CRCW0402 -100 1 % e3 ± 100 ppm/K ±1% 10 to 1 M/ every 4th value ...
Sample values are stored in a 8x16-bit FIFO. The FIFO accumulates samples from both ADCs, and the 12-bit sample value and a 4-bit channel tag are saved for each sample. The FIFO is read by the CPU from a register address. The module can be programmed to interrupt the processor based...
current setting through external resistor, programmable turn on/off, auto wake-up mode, Error detection mode (both open and shorted-LEDs) Short and open output error detection, thermal shutdown protection, adjustable output current through external resistor, Serial data IN/parallel data OUT Auto Pow...
Features • Standard Buck Controller with Integrated Switching Power MOSFET • Integrated Boot Diode • Input Voltage Range - Fixed 5V ±10% - Variable 5.5V to 25V • PWM Output Voltage Adjustable from 0.6V to 19V with Continuous Output Current up to 2A • ±1% VFB Tolerance • ...