undo qos pre-classify命令用来关闭报文信息预提取功能。 【命令】 qos pre-classify undo qos pre-classify 【缺省情况】 报文信息预提取功能处于关闭状态。 【视图】 Tunnel接口视图 【缺省用户角色】 network-admin 【举例】 #在Tunnel接口上开启报文信息预提取功能。 <Sysname> system-view [Sysname] interface tu...
5.9.1 qos pre-classify 6 拥塞避免 6.1 WRED配置命令 6.1.1 display qos wred interface 6.1.2 qos wred dscp 6.1.3 qos wred enable 6.1.4 qos wred ip-precedence 6.1.5 qos wred weighting-constant 7 QPPB 7.1 QPPB配置命令 7.1.1 bgp-policy 1 QoS策略 1.1 定义类的命令 1.1.1 description descrip...
The Quality of Service (QoS) Command Line Interface (CLI) Migration from PRE2 to PRE3 feature provides QoS CLI backward-compatibility between the PRE2 and PRE3, thereby enabling the PRE3 to accept PRE2-style commands. History for the QoS CLI Migration from PRE2 to PRE3 Feature...
Use the no form of this command to disable QoS debugging. debug qos {capability | command-installation-time | events | index | pre-classify | provision | service-policy | set | snmp | tunnel_marking} no debug qos {capability ...
Pre-configuration Tasks Before configuring a traffic classifier, complete the following tasks: Configure link layer attributes of interfaces to ensure that the interfaces work properly. Configure an ACL if an ACL needs to be used to classify traffic. Context Non-conflicting rules can be configured ...
The action must be named ipgpc.classify. All other actions should be reachable from ipgpc by way of parameters of type action or the next_action of a class. The set of types that are used for parameters of the different modules are: action ::= string protocol ::= 1..255 port ::...
CTRON-VLAN-CLASSIFY-MIB CTRON-VLAN-EXTENSIONS-MIB CTRON-WAN-IMUX-MIB CTRON-WAN-MIB CTRON-WAN-MULTI-IMUX-MIB CTRON-WEBVIEW-MIB CTSMTMIB-MIB CTTRAPLOG-MIB CYCLADES-ACS-ADM-MIB CYCLADES-ACS-CONF-MIB CYCLADES-ACS-INFO-MIB CYCLADES-ACS-MIB CYCLADES-ACS-PM-MIB CYCLADES-ACS-SYS-MIB CYCLADES...
5. R1 finds that there is a crypto mapconfiguredon S0/0 and finds the qos pre-classify command in the crypto map. A temporary copy of the packet is created at this point to be used for classification, as shown below: Scenario #1 – No preclassification configured ...
qos pre-classify 下载积分: 800 内容提示: Quality of Service Commandsqos pre-classifyQR-247Cisco IOS Quality of Service Solutions Command Reference qos pre-classifyTo enable quality of service (QoS) preclassification, use the qos pre-classify command in interface configuration mode. To disable the...
Pre-configuration Tasks Before configuring a traffic classifier, complete the following tasks: Configure link layer attributes of interfaces to ensure that the interfaces work properly. Configure an ACL if an ACL needs to be used to classify traffic. Context Non-conflicting rules can be configured ...